h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Saddle - glued DN 200 - 400<br />
Saddles are for connecting sewers at a later date. The outlet is generally at an angle of 45° or 90°. Saddles can be supplied,<br />
which are completely flush with the pipe's inside diameter. HOBAS supplies glued and screwed saddles. The dimensions can<br />
vary depending on national regulations. Transitions to other materials are available.<br />
Main pipe<br />
Outlet<br />
DN 1 de1 DN 2<br />
de2 [mm]<br />
Outlet<br />
[mm] GRP VC* PVC 45° 90°<br />
200 220 150 168 186 160 470 400<br />
250 272 150 168 186 160 470 400<br />
200 220 200 520 440<br />
300 324 150 168 186 160 470 400<br />
200 220 242 200 520 440<br />
250 272 250 590 490<br />
350 376 150 168 186 160 470 400<br />
200 220 242 200 520 440<br />
250 272 250 590 490<br />
300 324 315 690 560<br />
400 401 150 168 186 160 470 400<br />
200 220 242 200 520 440<br />
250 272 250 590 490<br />
300 324 315 690 560<br />
400 427 150 168 186 160 470 400<br />
* For DN 150: with GRP sleeve (normal load)<br />
90° 45°<br />
L2 = 250 mm (+/-10)<br />
B (min) [mm]<br />
200 220 242 200 520 440<br />
250 272 250 590 490<br />
300 324 315 690 560<br />
350 376 350 730 590<br />
All figures quoted are values and may slightly vary due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time of publication/update. Therefore the provided data cannot be construed as an express or implied warranty. All details must<br />
be checked and if necessary agreed to in each individual case. HOBAS cannot accept any liability. This also applies to errors, omissions and changes to technical data without notice.<br />
C04<br />
FITTINGS