h Technical Product Data Gravity Pipe Systems PN 1 - Hobas

Saddle- screwed DN 300 -700
GRP Vitrified Clay PVC
Saddles are for connecting sewers at a later date. The outlet is generally at an angle of 90°. Saddles can be supplied, which
are completely flush with the pipe's inside diameter. HOBAS supplies glued and screwed saddles. The dimensions can vary
depending on national regulations. Transitions to other materials are available.
Main pipe
Outlet
de1
DN 1 DN 2
[mm]
GRP VC* PVC [mm] [mm]
300 324 150 168 186 160 370 200
350 376 150 168 186 160 370 200
400 401 150 168 186 160 370 200
200 220 200 420 200
400 427 150 168 186 160 370 200
200 220 200 420 200
500 501 150 168 186 160 370 200
200 220 200 420 200
250 272 250 480 250
500 530 150 168 186 160 370 200
200 220 200 420 200
250 272 250 480 250
550 550 150 168 186 160 370 200
200 220 200 420 200
250 272 250 480 250
600 616 150 168 186 160 370 200
200 220 200 420 200
250 272 250 480 250
300 324 315 530 250
650 650 150 168 186 160 370 200
200 220 200 420 200
250 272 250 480 250
300 324 315 530 250
700 718 150 168 186 160 370 200
* for DN 150: with GRP sleeve for VC (normal load)
de2 [mm] B (min) L2 (min)
All figures quoted are values and may slightly vary due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time of publication/update. Therefore the provided data cannot be construed as an express or implied warranty. All details must
be checked and if necessary agreed to in each individual case. HOBAS cannot accept any liability. This also applies to errors, omissions and changes to technical data without notice.
C05
FITTINGS