h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
h Technical Product Data Gravity Pipe Systems PN 1 - Hobas
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Standard Manhole consisting of:<br />
1 Anti-flotation anchor (either as GRP base plate or laminated over with concrete upturn)<br />
2 Manhole pipe<br />
3 Port<br />
4 Berm (depending on national circumstances on site or directly from factory)<br />
5 Coupling on manhole pipe (for design in several parts)<br />
6 Ladder<br />
Standard Manhole DN 1000 - 3600<br />
7 Manhole cover (accessories on request)<br />
Outlet<br />
[mm]<br />
1000 150 - 500<br />
1100 150 - 500<br />
1200 150 - 600<br />
1400 150 - 800<br />
1500 150 - 900<br />
1600 150 - 1100<br />
1700 150 - 1200<br />
1800 150 - 1200<br />
2000 150 - 1600<br />
2200 150 - 1700<br />
2400 150 - 2000<br />
2555 150 - 2000<br />
3000 150 - 2400<br />
3600 150 - 2400<br />
The HOBAS Standard Manhole is made of GRP and hence corrosion resistant both on the inside and outside. It consists<br />
of a HOBAS <strong>Pipe</strong> with a suitably designed channel.<br />
All figures quoted are values and may slightly vary due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time of publication/update. Therefore the provided data cannot be construed as an express or implied warranty. All details must<br />
be checked and if necessary agreed to in each individual case. HOBAS cannot accept any liability. This also applies to errors, omissions and changes to technical data without notice.<br />
DN<br />
D01<br />
MANHOLES