RFID 125KHz EM4100 Card Copier / Duplicator (CK ... - Ent-mart.com
RFID 125KHz EM4100 Card Copier / Duplicator (CK ... - Ent-mart.com
RFID 125KHz EM4100 Card Copier / Duplicator (CK ... - Ent-mart.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
http://www.ent-<strong>mart</strong>.<strong>com</strong>/<br />
<strong>RFID</strong> <strong>125KHz</strong> <strong>EM4100</strong> <strong>Card</strong> <strong>Copier</strong> /<br />
<strong>Duplicator</strong><br />
(<strong>CK</strong>-ID-CP-01)
http://www.ent-<strong>mart</strong>.<strong>com</strong>/<br />
Operation Procedure<br />
1. Insert 2 x 3A batteries to the device.<br />
2. Power on the device using the ON/OFF Switch. Power LED<br />
will flash after 1-2 seconds initialization.<br />
3. Press and Hold the Read Button.<br />
4. Place the ID card/tag you want to copy from , near the<br />
device. The buzzer will keep louding and the Read LED will<br />
flash continuously.<br />
5. Press and Hold the Write Button.<br />
6. Place the writable ID card/tag you want to copy to, near the<br />
device. The buzzer will beep and the Write LED will light<br />
up for around 1 second.<br />
Note:<br />
This device works with ID cards/tags which fulfills below<br />
requirements:<br />
1. 125kHz frequency<br />
2. EM410X standards<br />
3. 4305 or T5577 chipsets
Change language