Standard Emergency Lighting - Beta Industries
Standard Emergency Lighting - Beta Industries
Standard Emergency Lighting - Beta Industries
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PROTECTION<br />
IP 21<br />
DEGREE<br />
Direct Current Soccorgroup<br />
The BEGHELLI SCCSE<br />
/SA SoccorGroup is a<br />
low power DC power<br />
supply with a regulated<br />
output and changeover<br />
device.<br />
The system has two<br />
outputs, a maintained<br />
(SA) output which is<br />
connected in parallel<br />
with the battery and a<br />
non-maintained output.<br />
When mains is present and in tolerance, the power<br />
supply will maintain the battery charge via a two rate<br />
constant voltage charger with current limit.<br />
The load is connected in parallel with the battery to<br />
the rectified incoming supply In the event of a mains<br />
failure, the changeover device transfers the maintained<br />
load to the battery and picks up the nonmaintained<br />
load within 500ms.<br />
Both outputs (M & NM) are sized for the full rating of<br />
the system. The battery is protected from over discharge<br />
by deep discharge protection isolator.<br />
Soccorgroups are equipped with an AUTOTEST<br />
capability where the built-in microprocessor will periodically<br />
performfunctional and duration tests. An<br />
RS232 serial port also allows the central system to<br />
be connected to a PC for remote control and monitoring.<br />
MAIN APPLICATIONS<br />
- Auxiliary cabin equipment<br />
- for DC panic systems<br />
- signalling systems<br />
- various alarm systems (fire alarms,<br />
gas detection systems, burglar alarms, etc.)<br />
- generally for any direct current load<br />
POWER MAINS<br />
SWITCHING<br />
CONTROL<br />
REMOTE CONTROL SWITCH<br />
BATTERY<br />
SE NON<br />
MAINTAINED LOAD<br />
REMOTE CONTROL SWITCH<br />
SA MAINTAINED<br />
LOAD<br />
B<br />
TECHNICAL<br />
SPECIFICATIONS<br />
A<br />
C<br />
Power supply voltage:<br />
- 230V ± 15% / 50Hz Single phase<br />
Utilities output + battery:<br />
- stabilized voltage ± 1%<br />
Non-maintained output:<br />
- stabilized DC output from battery<br />
Charging system:<br />
- switching<br />
- IU charging curve<br />
Changeover time:<br />
- Null SA load<br />
- SE load less than 500ms<br />
Instruments:<br />
Digital voltmeter and ammeter<br />
Protection:<br />
- fuses on power supply<br />
- fuse on load<br />
- battery fuse<br />
- minimum battery voltage<br />
cut-off remote control switch<br />
LED indicators<br />
- power mains present<br />
- power mains failure<br />
- maintaining battery charge<br />
- emergency<br />
- battery in reserve status<br />
- battery failure<br />
- self-testing<br />
Remote alarms:<br />
- operation from the power mains<br />
- operation from battery<br />
Storage batteries:<br />
- sealed lead acid batteries<br />
Recharging:<br />
- 80% in 10 hours, approx.<br />
Operative temperature:<br />
- 10 to + 40°C<br />
Cubicle:<br />
- single unit also containing<br />
the storage batteries<br />
- IP21 protection rating<br />
DIRECT CURRENT CENTRAL BATTERY DEVICES<br />
NON MAINTAINED / MAINTAINED LIGHTING<br />
58<br />
Ordering code Description Voltage Total Power Battery Dimensions (AxBxC) Weight kg<br />
3204 SCCSE/SA 50W12V 1P 12Vdc 50W 1x(12V 7Ah) 40x40x20 20<br />
3205 SCCSE/SA 100W12V 1P 12Vdc 100W 2x(12V 7Ah) 40x40x20 25<br />
3206 SCCSE/SA 200W12V 1P 12Vdc 200W 4x(12V 7Ah) 40x40x20 30<br />
3207 SCCSE/SA 200W24V 1P 24Vdc 200W 4x(12V 7Ah) 40x40x20 30<br />
3208 SCCSE/SA 300W24V 1P 24Vdc 300W 4x(12V 11Ah) 50x70x25 40<br />
3209 SCCSE/SA 500W24V 1P 24Vdc 500W 4x(12V 18Ah) 50x70x25 50<br />
3210 SCCSE/SA 200W48V 1P 48Vdc 200W 4x(12V 7Ah) 40x40x20 30<br />
3211 SCCSE/SA 300W48V 1P 48Vdc 300W 4x(12V 11Ah) 50x70x25 40<br />
3212 SCCSE/SA 500W48V 1P 48Vdc 500W 4x(12V 18Ah) 50x70x25 50<br />
3213 SCCSE/SA 500W110V 1P 110Vdc 500W 9x(12V 7Ah) 50x70x25 50
Change language