Standard Emergency Lighting - Beta Industries

Beghelli
• CENTRALISED MANAGEMENT
AND CONTROL
• CENTRALISED POWER SUPPLY
OF THE LUMINAIRES
• MAXIMUM FLEXIBILITY :
OPERATION AND AUTONOMY
CAN BE PROGRAMMED
DURING INSTALLATION
• REDUCED MAINTENANCE COSTS
• REDUCED OPERATIONAL
CONTROL COSTS
• INCREASED SAFETY
AND SECURITY
SCASE/SA SOCCORGROUP
The Beghelli Central System (CTS) consists of a centralised
battery emergency lighting system with automatic test
diagnostics.
The CTS performs the following functions :
. operating and full duration testing on the central battery
. operational testing of the luminaires
. centralised system control
The CTS can control up to 1024 luminaires and up to 10 central
batteries with AC output (SCASE/SA Soccor Group).
Depending on the type of connection, all Beghelli equipment
designed for The CTS can perform the Non Maintained (SA) or
Maintained (SE) function on the same wiring.
The CTS can also be programmed to operate in the emergency
mode for 1 or 3 hours. CTS can also manage mains lighting
units in emergency mode. An interface booster must be installed
every 64 units, to amplify the data signals.
Additionally by a mains-present sensor , the interface booster
allows restricted-zone activation of the emergency system,
therefore an interface is recommended for any main floor board.
The system performs also a control/protection function of the
safety circuits linking the units to the central groups.
POWER SUPPLY LINE
230V
CENTRAL BATTERY LINE
INTERFACE
CENTRAL MODULE
FOR COMPUTER
LAMP IN SE
NON MAINTAINED
MODE
LAMP IN SA
MAINTAINED
MODE
IN
OUT
CONTROL UNIT
Connection plan:
an example
16
ALSO IN RACK VERSION
19” 3 UNITS
SOURCE