hOLe SAWS
hOLe SAWS
hOLe SAWS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HOLE <strong>SAWS</strong><br />
hss bimetal<br />
HSS BI-METAL HOLE <strong>SAWS</strong><br />
Use<br />
w For a wide range of applications from production and<br />
maintenance to the electrical and building trades.<br />
Characteristics<br />
w Thicker bottom.<br />
w 4/6 variable tooth pitch with positive angle to reduce<br />
vibrations.<br />
w Cutting depth : 34-38 mm.<br />
VARIABLE PITCH HOLE SAW sc - csc<br />
Packaging<br />
w SC : Unit cardboard box from Ø 14 to 210 mm.<br />
w CSC : Unit blister pack from Ø 14 to 70 mm.<br />
HOLE SAW SC<br />
HOLE SAW cSC<br />
Use<br />
w For fine cuts in metal sheets.<br />
w Particularly recommended for cutting tubes.<br />
w Sudden stoppages due to binding are greatly reduced.<br />
Characteristics<br />
w Thicker bottom blade.<br />
w 10 TPI fine pitch.<br />
w Cutting depth : 34-38 mm.<br />
FINE PITCH HOLE SAW scf<br />
Packaging<br />
◗ Unit blister pack box from Ø 16 to 68 mm.<br />
◗ Unit cardboard box from Ø 76 to 127 mm.<br />
ACCESSORIES FOR HOLE <strong>SAWS</strong> SC - CSC - SCF - SCCL<br />
Types Characteristics ULTRA ® Code<br />
Standard types<br />
Mandrel fitted with a HSS SC 6 pilot. Driving drill Ø 6.35 mm (1/4”). SC 1 CSC 1<br />
Mandrel fitted with a HSS SC 12 pilot. Hexagonal driving shaft 9.5 mm (3/8”). SC 2 R CSC 2 R<br />
Mandrel fitted with a HSS SC12 pilot drill with 2 driving pins.<br />
Hexagonal driving shaft 11.11 mm (7/16”).<br />
Mandrel fitted with a HSS SC12 pilot drill with 2 driving pins.<br />
Hexagonal driving shaft 9.5 mm (3/8”).<br />
Mandrel similar to a SC 2R fitted with a HSS SC 12 pilot drill SDS driving<br />
shank to fit on a drilling machine after stopping hammering action.<br />
Mandrel similar to a SC 3 fitted with a HSS SC 12 pilot drill SDS driving<br />
shank to fit on a drilling machine after stopping hammering action.<br />
SC 3<br />
SC 3 R<br />
HSS pilot drill Ø 6.35 mm (1/4”). L=117 mm. To fit SC 1. SC 6<br />
HSS pilot drill Ø 6.35 mm (1/4”). 3 flutes. L=100 mm. To fit economic mandrels. SC 12<br />
Extension bar L=300 mm. Hex.11.11 mm to fit SC 3. SC 5<br />
Ejector spring to clean off the cut piece. SC 11<br />
Spare crews for mandrels SC 1 - SC 2R - SD 2 (10 per bag).<br />
Spare crews for mandrels SC 3 - SD 3 (10 per bag).<br />
SD 2<br />
SD 3<br />
SC 120<br />
SC 300<br />
Arbor adaptor to fit mandrel SC 2R. SC 9<br />
CSC 3<br />
20