hOLe SAWS

TAPS
AND DIES
GROUND THREAD HSS TAPS, RIGHT-HAND ISO METRIC PITCH
For precision tapped holes in various metals used in engineering. For tapping with a variable-speed drill or power tool, use tap no 3,
lubricating with ULTRA COUPE.
CHARACTERISTICS
◗ HRc 62/64 treated HSS M2 steel.
◗ "Stepped" taps with straight grooves. Ground, cleared threads, tolerance H6.
◗ Complies with ISO-R529 and NF-E 66103 standards.
PACKAGING
◗ Sets of 3 taps (Starting + Semi-finishing + Finishing).
ULTRA ®
Code
Ø
mm
Pitch
mm/100 Overall mm
L
I
mm
C
mm
Number
of parts
2304-30 3 50 48 14 2,5 15 3
2304-40 4 70 53 17 3,15 20 3
2304-50 5 80 58 16 4 30 3
2304-60 6 100 66 19 5 50 3
2304-70 7 100 66 19 5,6 60 3
2304-81 8 * 100 72 22 6,3 80 3
2304-80 8 125 72 22 6,3 80 3
2304-101 10 * 100 80 24 8 150 3
2304-100 10 150 80 24 8 150 3
2304-121 12 * 150 89 29 7,1 165 3
*Fine pitches
ULTRA ®
Code
Ø
mm
Pitch
mm/100 Overall mm
L
I
mm
C
mm
Number
of parts
2304-120 12 175 89 29 7,1 165 3
2304-141 14 * 150 95 30 9 260 3
2304-140 14 200 95 30 9 260 3
2304-161 16 * 150 102 32 10 330 3
2304-160 16 200 102 32 10 330 3
2304-181 18 * 150 112 37 11,2 480 3
2304-180 18 250 112 37 11,2 480 3
2304-200 20 250 112 37 11,2 515 3
2304-220 22 250 118 38 12,5 650 3
2304-240 24 300 130 45 14 860 3
ULTRA ® Code Composition Description
2304-BA7 Metal box 7 sets of 3 taps of Ø : 3, 4, 5, 6, 8, 10, 12 mm 910
2304-BA14
Metal box
7 sets of 3 taps of Ø : 3, 4, 5, 6, 8, 10, 12 mm
7 drill bits 2204 of matching Ø :
2,50 - 3,30 - 4,20 - 5,00 - 6,70 - 8,50 - 10,25 mm
1250
32