hOLe SAWS

BAND sawcarbide
CARBIDE BAND SAW
characteristics
◗ NF : Sharpened and raker teeth, trimming cast moulding, non ferrous metals.
◗ ALU : Sharpened and raker teeth, for cutting big aluminium blocks.
◗ TC : Ground sharpened blade, high speed and high cutting pressure in difficult steels.
◗ GRIT : Carbide deposit, cutting of abrasive materials.
Advance NF
Type of teeth
NF
positive
cutting angle
Section
(width * thickness)
Number of teeth
per inch
mm Inch 3
20 x 0,90 3/4x.035
27 x 0,90 1x.035
34 x 1,10 1 1/4x.042
Advance ALU
Type of teeth
ALU
positive
cutting angle
Section
(width * thickness)
Number of teeth per inch
mm Inch 1,1/1,6 1,5/2 2 2/ 3 3
34 x 1,10 1 1/4x.042
41 x 1,30 1 1/2x.055
54 x 1,60 2x.062
Advance TC
Type of teeth
TC
positive
cutting angle
Section
(width * thickness)
Number of teeth per inch
mm Inch 0,6/1 1,1/1,6 1,4/2 2 2/ 3 3 3/4
27 x 0,90 1x.035
34 x 1,10 1 1/4x.042
41 x 1,30 1 1/2x.055
54 x 1,60 2x.062
67 x 1,60 2 5/8x.062
80 x 1,60 3 1/8x.062
Advance grit
Type of teeth
GRIT
carbide deposit
Section
(width * thickness)
mm Inch Continuous Discontinuous
10 x 0,65 3/8x.025
13 x 0,65 1/2x.025
20 x 0,80 3/4x.035
25 x 0,90 1x.035
34 x 1,10 1 1/4x.042
41 x 1,30 1 1/2x.042 ‌
non ferrous
metal
profile
wood with
nails
plastic pallet steel copper, brass stainless
steel
49
aluminium
hard to
work
materials