hOLe SAWS

SAWS
CARBIDE HOLE SAWS
Use
w Drilling abrasive material such as fibre
glass, plaster ceramics, reinforced plastics.
w Exceptionally high wear resistance gives
a long life and allows the use of high
cutting speeds.
CARBIDE TIPPED HOLE SAW tct
Characteristics
w Solid sharpened carbide teeth welded to a treated steel
body.
w 4 TPI.
w Cutting depth : 34-38 mm.
w Laser marking.
Packaging
w Unit blister pack from Ø 19 to 70 mm.
w Unit cardboard box from Ø 79 to 152 mm.
Use
w Boring very abrasive materials such as ceramics,
asbestos, tiles, bricks, slates. (Do not use
hammering features on portable drilling machines).
Characteristics
w Cutting depth : 35-40 mm.
w A gulleted deposit of carbide
grain grit, on a treated steel
body.
CARBIDE GRIT HOLE SAW TC
Packaging
w Unit blister pack from
Ø 14 to 70 mm.
w Unit cardboard box from
Ø 73 to 152 mm.
Use
w Drilling very tough and abrasive material
and composite which were untill now
difficult to drill, such as : enamel, tough
ceramic, vitrified ceramic, graphite, glass,
aluminium, composite material, marble,
cast iron…
w Frequent lubricating essential for enamel,
ceramics, glass and marble.
Do not use cutting fluids when working
with composite materials and reinforced
polyester.
DIAMOND GRIT HOLE SAW td
Characteristics
w Continuous deposit of diamond grit.
w Electrolytic area processing.
w Norm : US mech = 40-50.
w Granulometry : size = 420-300.
w Laser marking.
Packaging
w Unit blister with directions
for use.
22