hOLe SAWS

FOR POWER TOOLS
ULTRA ® PRO Carbide - Special aluminium
For a perfect cut without burrs on aluminium profiles and rods, light alloys zinc,
brass, bronze and plastic.
CHARACTERISTICS
w Carbide tips, alternate and flat, Heller 5°
negative.
w Hardened steel body, hammered and
polished.
w Several resharpenings.
ULTRA ® Code
Ø External
mm
ULTRA ® PRO STEEL CARBIDE- METAL
Carbide blades for metal cut
CHARACTERISTICS
◗ High quality blade.
◗ Optimised carbide inserts.
◗ Pre- tension blades for high
performance cut.
Packaging
w Unit plastic sleeve.
Ø Bore
mm
◗ Cut without lubrication.
◗ Five times re-sharpening blades.
◗ Noise level under-control.
◗ Vanadium Chromium base plate.
◗ Lower thickness of the plate.
Tip
Thickness
Reduction
ring
Number of teeth
(Z)
1471 150 30 2,8 30 x 20 42 290
1473 160 20 2,8 20 x 16 42 295
1476 170 30 2,8 48 350
1483 190 30 2,8 54 435
1488 210 30 2,8 30 x 16 54 520
1490 220 30 2,8 54 645
1492 235 30 2,8 30 x 25 64 720
1493 235 30 2,8 48 550
1494 240 30 2,8 64 745
ULTRA ® Code
Ø External
mm
Ø Bore
mm
Tip
Thickness
Reduction
ring
Number of teeth
(Z)
1700 200 20 2 20 x16 42 440
1701 200 20 2,8 20 x16 54 440
1702 192 20 1,85 20 x16 70 440
1703 232 25,4 2 48 640
1704 230 25,4 2,8 62 640
1705 230 25,4 2 84 640
1706 305 25,4 2,2 60 840
1707 355 25,4 2,6 72 940
1708 355 25,4 2,6 90 940
REDUCTION RING
Use
w To set up a blade with 30 bore on a shaft of diameter 16,
use our ring 30*16 : ref. 1103.
Packaging
w Unit plastic sleeve.
ULTRA ® Code
External Ø x Internal Ø
mm x mm
1101 30 x 25 4
1102 30 x 20 8
1103 30 x 16 10
1105 20 x 16 2
39