hOLe SAWS

SAWS
CARBIDE HOLE SAWS
Accessories
Use
w Drilling most building materials from
ø 30 to 66 mm.
w Extensions bars for deep drilling.
w Cutting depth : 40 mm
CARBIDE TIPPED FOR CONCRETE 2128
Characteristics
w Treated steel body. Sharpened carbide tips.
w Drill forming one piece with the chuck.
w Black lacquer.
Packaging
w Cardboard box.
DIAMETERS OF THE
HOLE SAWS 2128
ULTRA ® Code Ø (mm) Ø (Inch)
2128-30 30 1 3/16
2128-35 35 1 3/8
2128-45 45 1 25/32
2128-50 50 2
2128-60 60 2 3/8
2128-66 66 2 5/8
Types Characteristics Length (mm) ULTRA ® Code
Mandrel SDS plus 90 2128-1
Drill forming one piece with the chuck. Mandrel SDS plus 150 2128-2
Adaptors 2138
Mandrel SDS plus 300 2128-3
Types Characteristics Length (mm) ULTRA ® Code
Grooved x SDS plus 220 2138-1
Grooved x 1 / 2” thread 110 2138-2
SDS plus x 1 / 2” thread 60 2138-6
SDS plus x 1 / 2’’ thread
(no hammering device)
35 2138-5
CARBIDE HOLE SAW FOR WOOD CUTTING TCB ULTRA ® Code
Use
◗ Hole saws with carbide teeth specially recommended to drill wood,
plywood, fibreboard, hardened papers, PVC ...
Features
◗ Carbide tipped hole saws with large pitch preventing failing or burning.
◗ To be resharpened, tooth can be replaced in case of breaking.
◗ Cutting depth : 40 to 60 mm.
Packaging
◗ Ø 16 to 51 : single unit in plastic tube with a hanging hole.
◗ Ø 60 and over : single unit in plastic tube without hanging hole.
24
Ø
(mm)
Ø
(Inch)
TCB25 25 1
TCB30 30 1 3/16
TCB35 35 1 3/8
TCB40 40 1 9/16
TCB45 45 1 25/32
TCB58 58 2 9/32
TCB60 60 2 3/8
TCB63 63 2 15/32
TCB65 65 2 9/16
TCB70 70 2 3/4
TCB80 80 3 5/32
Fitting
mandrel
TCB2
or
TCB3
(SDS)
Fitting
drill
TCB1