Ithaca 610 Programmer's Guide - TransAct

More documents

Recommendations

Info

Specifications and Requirements Ithaca ® 610 Programmer’s Guide Once narrow paper has been used, some part of the print head always contacts the platen. If 80 mm. paper is used after setting up and running 58 mm. paper, the head or the cutter blade may be worn out. Never change the paper width from narrow to wide (58 to 80 mm.) once you set the paper width to narrow (58 mm.). Media Specifications Receipt Paper Paper feed method Paper feed pitch Paper width Roll diameter Paper thickness Roll paper core Roll footage Friction feed Default - 1/8 inch 80 mm: 79.5 +/- 0.5 mm. (3.13 +/- 0.02 inches) 58 mm: 57.5 +/- 0.5 (2.26 +/- 0.02 inches) 101.6 mm. (4.0 inches) Max. 0.06 to 0.09 mm. (.00225 to .0035 inches) Inside diameter .445 to .635 inches Outside diameter .730 to .860 inches 400 feet (min.) Thermal Paper Grades (Monochrome) Paper Kanzaki P-300 Kanzaki P-310 Appleton Alpha 400-2.3 Manufacturer Basis Weight 14.1 lbs. 14.2 lbs. 14.5 lbs. Caliper .00225 mils .00226 mils .00235 inches Image color black Black Black Brightness 85% 85% 87% Activation Temp. Initial: 74+/-5°C Effective: 87 +/- 5°C Optimum: 100 +/- 5°C Initial:73 +/-5°C Effective: 83 +/- 5°C Optimum: 88 +/- 5°C Initial:77.2°C Optimum: 104.8 +/- 5°C Smoothness (bekk) 325 sec. Ave. 325 sec.Ave. 200 (bekk). Table 6: Paper Grades-Monochrome Paper Usage Precautions: Use only specified thermal paper. If other paper is used, print quality, head life, and cutter life may deteriorate. Paper Out A receipt paper out sensor is provided as a standard feature. It senses when there is approximately .5 inches length of paper left on the paper roll. Page 20 Rev D 28-05897
Specifications and Requirements Ithaca ® 610 Programmer’s Guide 1.00” 2.83 0.15 3.15 Figure 1 Receipt Printing, Tear off Position The paper tear off is positioned 1 inch from the last line of print 28-05897 Rev D Page 21
Page 1 and 2: PN 28-05897 Rev D November 2010 Ith
Page 3 and 4: Federal Communications Commission R
Page 5 and 6: Table of Contents Change History ..
Page 7 and 8: Standard Emulation ................
Page 9 and 10: Figures Figure 1 Receipt Printing,
Page 11: 28-05897 Rev D Page ix
Page 14 and 15: This page intentionally left blank
Page 16 and 17: About Your Ithaca ® 610 Printer It
Page 18 and 19: About Your Ithaca ® 610 Printer It
Page 21 and 22: chapter 2 Ithaca ® 610 Specificati
Page 23 and 24: Specifications and Requirements Ith
Page 31: Specifications and Requirements Ith
Page 39 and 40: Pin Number Direction Direction Dire
Page 41 and 42: chapter 3 Setup Procedures 28-05897
Page 43 and 44: Setup Procedures Ithaca ® 610 Prog
Page 49: Setup Procedures Ithaca ® 610 Prog
Page 54 and 55: How to Operate the Ithaca ® 610 It
Page 61 and 62: chapter 5 Configuring Your Ithaca
Page 63 and 64: Configuring Your Ithaca ® 610 Prin
Page 69: Configuring Your Ithaca ® 610 Prin
Page 74 and 75: Programming Codes Ithaca ® 610 Pro
Page 82 and 83:
Programming Codes Ithaca ® 610 Pro
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
B > > > > > C > > > > > D > > > > >
Page 124 and 125:
B > > > > > C > > > > > D > > > > >
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
This page intentionally left blank
Page 234 and 235:
Unicode Ithaca ® 610 Programmer’
Page 236 and 237:
This page intentionally left blank
Page 238 and 239:
Extended Control Codes Ithaca ® 61
Page 241 and 242:
chapter 10 Communications 28-05897
Page 243 and 244:
Communications Ithaca ® 610 Progra
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265:
Page 268 and 269:
Appendix A: Code Page Definition Ta
Page 271:
Appendix C: Ordering Supplies Ithac
Page 274 and 275:
Index Ithaca ® 610 Programmer’s
Page 276 and 277:
Page 278:
show all

Ithaca 610 Programmer's Guide - TransAct

Create successful ePaper yourself

Delete template?

Save as template?