OTR tyres product catalogue - Titan Distribution

www.titan-intl.com
Load and Inflation Tables
37.25-35 Scraper Usage Chart
For Standard Scraper Service: < 2.5 mi (4 km), < 30 mph (50 kph)
Manufacturer Model Payload
Minimum Ply
Rating
Front Minimum
Inflation
Rear Minimum
Inflation
yd³ (m³) psi (bar) psi (bar)
Caterpillar 631D 31 (23.7) 42 55 (3.8) 40 (2.8)
631E 31 (23.7) 42 55 (3.8) 45 (3.1)
631E II 31 (23.7) 42 55 (3.8) 45 (3.1)
631G 31 (23.7) 42 65 (4.5) 55 (3.8)
633D 34 (26) 42 60 (4.2) 55 (3.8)
633E 34 (26) CT 70 (4.8) 65 (4.5)
633E II 34 (26) 42 65 (4.5) 60 (4.2)
637D 31 (23.7) 42 55 (3.8) 55 (3.8)
637E 31 (23.7) 42 55 (3.8) 60 (4.2)
637E II 31 (23.7) 42 60 (4.2) 60 (4.2)
637G 31 (23.7) 42 65 (4.5) 65 (4.5)
Terex TS24C 34 (26) 42 60 (4.2) 60 (4.2)
CT - Contact Titan Technical Services
S24C 34 (26) 42 60 (4.2) 50 (3.5)
TS38C 46 (35.2) 42 60 (4.2) 65 (4.5)
TS46C 56 (42.8) 42 60 (4.2) 65 (4.5)
Pressure and ply recommendations based on normal quarry operations with standard equipment. For different applications or modified equipment, please contact the Technical Service
Representative for a specific recommendation. Tire damage of failure caused by improper load, ply, speed or inflation practices is not covered by the Titan Tire Warranty Policy.
45/65-45 Loader Usage Charts
For Standard Loader Service: < 250 ft (76 m), < 5 mph (10 kph)
For L-5, L-5S and L-5/L-5S with 7x7 Steel Belts
Manufacturer
Model
Standard
Bucket Size
Front
Minimum
Ply
Front
Minimum
Inflation
Rear
Minimum
Ply
Rear
Minimum
Inflation
yd³ (m³) psi (bar) psi (bar)
Caterpillar 992B 10 (7.6) 46 46 70 (4.8) 60 (4.2)
992C 12.5 (9.6) 50 46 105 (7.3) 60 (4.2)
992C HL 12.5 (9.6) 58 46 115 (7.9) 70 (4.8)
992D 14 (10.7) 58 46 110 (7.6) 65 (4.5)
992D HL 14 (10.7) 58 46 120 (8.3) 70 (4.8)
992G 16 (12.2) 58 46 120 (8.3) 80 (5.5)
992G HL 16 (12.2) 58 50 120 (8.3) 85 (5.9)
Komatsu WA800-2 13.7 (10.5) 50 46 105 (7.3) 60 (4.2)
WA800-3 14.4 (11) 58 46 115 (7.9) 70 (4.8)
WA900-3 17 (13) 58 46 120 (8.3) 80 (5.5)
LeTourneau L1000 17 (13) 58 46 120 (8.3) 75 (5.2)
For service under chains, or load and carry operations, contact Titan Technical Services for Aralon belted options.
HL - High Lift, extended booms, etc.
Pressure and ply recommendations based on normal quarry operations with standard equipment. For different applications or modified equipment, please contact the Technical Service
Representative for a specific recommendation. Tire damage of failure caused by improper load, ply, speed or inflation practices is not covered by the Titan Tire Warranty Policy.
70