Std Frame_Install.pdf - Aztec

Step 9:
The photo to the right shows the lace style connection before
the storm flap has been secured.
Step 10:
Now secure the tent top to the perimeter frame. Tighten the
two buckles closest to the corner fitting first then tighten the
remainder of the buckles.
Step 11:
Lift up one side of the tent off the ground and slide two of the
leg pipes over the corner fitting and pin into place. Tent Jacks
(optional accessory) are shown to aid in the lifting of the frame.
Either using tent jacks, man power, or another lifting device the
frame needs to be supported at every leg when lifting to prevent
undue stress on frame members.
Step 12:
Lift up the other side of the tent and install and pin the leg
pipes on the other two corner fittings and middle legs.
www.aztectents.com