You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Install</strong>ation- 15’ Wide<br />
Step 1:<br />
Lay out four (4) corner fittings and four (4- 14' 4") spreader pipe<br />
to form perimeter frame. Layout (4) hip rafters (10’6”) on the<br />
ground and place the 4pt Crown in the center of the tent.<br />
Step 2:<br />
Start assembling the frame by inserting and pinning the four hip<br />
rafter poles to the 4pt Crown. Connect the corner fittings to the<br />
bottom of the rafter pipes.<br />
Step 3:<br />
Start at one corner of the tent and connect and pin the corner<br />
fitting to the perimeter pipe.<br />
Step 4:<br />
Continue by connecting and pinning the perimeter pipe to this<br />
corner and work your way around the tent connecting all of the<br />
perimeter pipes and corner fittings until all of the upper framing<br />
is connected and pinned.<br />
www.aztectents.com
Change language