You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Special models<br />
Impact load detection<br />
1A input<br />
Upper-lower limit detection<br />
DC motor<br />
Additional specifications<br />
UL approved<br />
CE marking<br />
Subtropical specifications<br />
Special power source voltage<br />
Outline of specifications<br />
Shock Relays are UL approved. Operation power source: AC115V 50/60Hz, AC230V 50/60Hz<br />
Shock Relays have the CE marking.<br />
Outline of specifications<br />
Separately from the usual overload, abnormally large current is instantly detected and outputted.<br />
Impact load settings can be set from 30%-300%. Impact load shock time is within<br />
0.05s. Other functions and outline dimensions conform to product standards.<br />
When the secondary side of CT is 1A, it can input directly to the Shock Relay.<br />
(It's not necessary to consider motor capacity.)<br />
Other specifications and outline dimensions conform to product standards.<br />
Detects both overload and under-loads; however, because there is 1 output relay,<br />
it cannot distinguish between upper and lower limits.<br />
For detecting DC motor current overload, a shunt is used instead of a current transformer<br />
(refer to page 89 for more details) . When selecting a shunt,<br />
let TEM know the DC motor's rated current.<br />
Can be used when ambient humidity is 90% RH and below. Other specifications conform to standard products.<br />
Power source voltage: AC230V, AC240V, AC115V, AC120V (please contact us for more information on other voltages)<br />
Special unit model<br />
TSB151M<br />
TSB152M<br />
Order symbol<br />
Panel installation It can be mounted on the control panel surface and operated.<br />
The integral multiple can be extended for a maximum of 60 seconds.<br />
P<br />
Start time modification The front panel scale becomes an integral multiple (x2, x3).<br />
Other specifications conform to standard products.<br />
T1<br />
The integral multiple can be extended for a maximum of 60 seconds.<br />
Shock time modification The front panel scale becomes an integral multiple (x2, x3).<br />
Other specifications conform to standard products.<br />
T2<br />
Automatic reset For the 150 Series only, the self-holding output relay can be changed to automatic reset. H<br />
TSB152C<br />
TSB151W<br />
TSB152W<br />
Main unitTSB152D<br />
ShuntSEA<br />
UL<br />
CE<br />
S<br />
V<br />
82