Chemical Anchor Technical Handbook
Chemical Anchor Technical Handbook
Chemical Anchor Technical Handbook
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Details<br />
CF900 <strong>Technical</strong> Information<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Product Overview<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Theory<br />
Contents<br />
Applications<br />
1. Areas of<br />
Application<br />
2. Benefits<br />
3. Properties<br />
Usage Instructions<br />
CF900<br />
Reaction resin mortar, vinylester-based<br />
styrene-free<br />
Hollow brick<br />
Usage<br />
• Used for medium-load applications<br />
• The perforated sleeve can be used in<br />
hollow bricks, Hlz 4 to DIN 105,<br />
sand-lime hollow bricks, KSL 4 to DIN 106,<br />
hollow light concrete bricks, Hbl 2 to DIN 18 151 and<br />
hollow concrete bricks, Hbn 4 to DIN 18 153<br />
• Suitable for attachment of façades, projecting roofs, wooden<br />
constructions, metal constructions, metal profiles, consoles, railings,<br />
grills, sanitary fittings, pipe connections, cable runs etc.<br />
• Secure anchoring in hollow brick; high load bearing capacity<br />
• No expansion effect, allowing attachment points to be placed close to<br />
edges etc.<br />
• Cartridge can be used until the expiration date by replacing either the<br />
static mixer or resealing cartridge with the sealing cap<br />
• <strong>Anchor</strong>ing by composite form-fitting between injection mortar, sleeve<br />
collar, anchor rod and anchoring surface<br />
• Galvanized steel, stainless steel, highly corrosion-resistant steel<br />
Undersurface: Hollow brick<br />
Product Overview<br />
<strong>Chemical</strong> <strong>Anchor</strong>ing<br />
Contents Applications<br />
Theory<br />
Product Details<br />
Reaction<br />
Characteristics<br />
Drill hole with percussion drill Clean drill hole (blow out: 2x,<br />
brush out: 2x, blow out: 2x)<br />
Screw mixer to cartridge<br />
Product Details<br />
Additional<br />
Information<br />
Underground<br />
temperature<br />
Curing start<br />
Curing end Curing end<br />
dry<br />
wet<br />
underground underground<br />
–5°C 90 min 360 min 720 min<br />
0°C 45 min 180 min 360 min<br />
+5°C 25 min 120 min 240 min<br />
+10°C 15 min 80 min 160 min<br />
+20°C 6 min 45 min 90 min<br />
+30°C 4 min 25 min 50 min<br />
+35°C 2 min 20 min 40 min<br />
Squeeze out and discard approx.<br />
10 cm of compound before use<br />
Push anchor into base of<br />
sleeve while turning clockwise<br />
Insert perforated sleeve<br />
Observe hardening time<br />
Starting from the back end,<br />
fill perforated sleeve with mortar<br />
Install component, apply torque<br />
Additional<br />
Information<br />
3.4.1