PMS-920 - Aplisens SA
PMS-920 - Aplisens SA
PMS-920 - Aplisens SA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User manual for meter with U/I input <strong>PMS</strong>-<strong>920</strong><br />
Voltage measurement accuracy<br />
Voltage input resistance<br />
± 0,1% @ 25°C; ± one digit (for 0÷10 V range)<br />
> 50 kΩ<br />
Temperature stability 50 ppm / °C<br />
Display range<br />
-999 ÷ 9999, plus decimal point<br />
Accepted prolonged input overload: 20%<br />
Outputs<br />
relay:<br />
or OC-type:<br />
sensor power supply:<br />
0, 1 or 2 NO, 1A/250V AC (cos ϕ = 1)<br />
0, 1 or 2 30mA / 30VDC / 100mW<br />
24V +5%, -10% / max. 100 mA, stabilized<br />
Communication interface<br />
Baud rate<br />
Display<br />
(depending on version)<br />
Data memory<br />
RS 485, 8N1 and 8N2, Modbus RTU, not separated<br />
1200 bit/s ÷ 115200 bit/s<br />
LED, 4 digit, 13mm height, two-colour (red and green)<br />
or (for IP 65 version) 5 digit, 9mm height, red<br />
non-volatile memory, EEPROM type<br />
Protection level (depending on<br />
display size)<br />
5 x 9mm version: IP 65 (from front), optional version with panel cut-out<br />
sealing available<br />
IP 20 (housing and connection clips)<br />
4 x 13mm version: IP 40 (from front)<br />
IP 20 (housing and connection clips)<br />
Housing type<br />
Housing material<br />
Housing dimensions<br />
Mounting hole<br />
Assembly depth<br />
Panel thickness<br />
Operating temperature<br />
Storage temperature<br />
Humidity<br />
Altitude<br />
panel<br />
NORYL - GFN2S E1<br />
72 x 36 x 97 mm<br />
66.5 x 32.5 mm<br />
min. 102 mm<br />
max. 5 mm<br />
0°C to +50°C<br />
-10°C to +70°C<br />
5 to 90% no condensation<br />
up to 2000 meters above sea level<br />
Screws tightening max. torque 0,5 Nm<br />
Max. connection leads diameter 2,5 mm 2<br />
Safety requirements according to: PN-EN 61010-1<br />
installation category: II<br />
pollution degree: 2<br />
voltage in relation to ground: 300V AC<br />
insulation resistance: >20MΩ<br />
insulation strength between power supply and<br />
input/output terminal: 1min. @ 2300V<br />
insulation strength between relays terminal:<br />
1min. @ 1350V<br />
5