16.11.2012 Views

NAMC-STM1/4 Telecom AMC Module Technical Reference ... - NAT

NAMC-STM1/4 Telecom AMC Module Technical Reference ... - NAT

NAMC-STM1/4 Telecom AMC Module Technical Reference ... - NAT

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>N<strong>AMC</strong></strong>-<strong>STM1</strong>/4 – <strong>Technical</strong> <strong>Reference</strong> Manual<br />

5.5 Connector JP3: JTAG connector<br />

This JTAG port connects to the JTAG interfaces of the Arrow and Temux devices, which are<br />

configured in a daisy chain.<br />

Pin No.<br />

5.6 Hot Swap Switch SW1<br />

Table 8: JTAG Connector Pinout<br />

Signal Signal Pin No.<br />

1 TCK GND 2<br />

3 TDO +3,3V 4<br />

5 TMS nc 6<br />

7 nc nc 8<br />

9 TDI GND 10<br />

Switch SW1 is used to support hot swapping of the module. It conforms to PICMG <strong>AMC</strong>.0.<br />

5.7 The Front Panel Connectors (S1 – S2)<br />

The two optical front panel connectors have standard SC-plugs, and can be equipped with<br />

either singlemode or multimode transceivers.<br />

Version 1.2 © N.A.T. GmbH 26

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!