concealed - Truth Hardware

STANDARD DUTY
4-BAR EGRESS HINGE
(222SS - 224SS Series)
4
(
FIG. F 1 TRUTH STANDAR DUTY 4-BAR EGRESS CASEMENT HINGE
(Truth 222SS and 224SS Series)
TRUTH STD DUTY 4-BAR CASEMENT HINGE W/ STOP
MAT'L
HINGE
CALLOUT
&
(ACTUAL LENGTH)
PART STD EGRESS TO
NUMBER STOP WASHABILITY
SST
12"
12.61"
[320.3 mm]
35.09.00
.100
N/A
SST 16" 16.41"
[416.7 mm] 35.10.00
.100
N/A
SST
16"
16.41"
[416.7 mm]
35.11.00
.100
YES
PART NUMBERING SYSTEM
Product No.
Model
Finish
Assembly
35
09
00
100
4-Bar Hinge
Standard Duty
Egress
12" Length
No
Decorative
Finish
W/ Stop Std. Open
(Hinge Feature)
4-BAR HINGE APPLICATION TABLE FOR CASEMENT HINGES
(SIDE HUNG) (As certified to AAMA 904.1)
HINGE
CALLOUT
&
(ACTUAL LENGTH)
12"
16"
16"
12.61"
[320.3 mm]
16.41"
[416.7 mm]
16.41"
[416.7 mm]
Sash/Vent
Width Range
14"-32"
[356 mm-813 mm]
18"-32"
[457 mm-813 mm]
18"-32"
[457 mm-813 mm]
Ultimate
(see note #6)
Max Sash
Vent Weight
82 lbs at 32"
[37.2 kg at 813 mm]
82 lbs at 32"
[37.2 kg at 813 mm]
82 lbs at 32"
[37.2 kg at 813 mm]
NOTES:
1. THESE STANDARD DUTY EGRESS 4-BAR HINGES ARE RECOMMENDED FOR CASEMENT APPLICATIONS ONLY.
2. FOR ADDITIONAL RECOMMENDATIONS REGARDING 4-BAR HINGES, PLEASE REFER TO THE TRUTH TIPS SECTION
AND THE TECH NOTES SECTION AT THE END OF THE CATALOG.
3. UNLESS OTHERWISE SPECIFIED ALL 222-224 SERIES HINGES HAVE A BRASS SHOE.
4. THE STANDARD STACK HEIGHT OF A STANDARD DUTY HINGE IS .500 (12.7mm). IF A SHIM OR WASHER IS USED
THE STACK HEIGHT WILL INCREASE BY THE SHIM OR WASHER THICKNESS.
5. ULTIMATE SASH WEIGHT & WIDTH FOR HINGES AS SHOWN IN CHARTS ARE BASED ON AAMA 904.1 "SPECIFIATION
FOR MULTI-BAR HINGES IN WINDOW APPLICATIONS". THESE NUMBERS DO NOT APPLY TO WINDOWS BEING TESTED
TO ANSI/AMMA/WDMA 101/I.S 2/NAFS-02 "CASEMENT HARDWARE LOAD TEST".
5q