concealed - Truth Hardware

More documents

Recommendations

Info

STANDARD DUTY EGRESS/WASHABILITY 4-BAR HINGE (224SS Series) FIG. 3 TRUTH STANDARD DUTY EGRESS/WASHABILITY 4-BAR CASEMENT HINGE (<strong>Truth</strong> 224SS Series) .57 RELEASE KEY #16000 14.4 mm 2.56 65.1 mm 2.74 69.6 mm RELEASE KEY #16000 2 REQ'D PER WINDOW WASHABILITY POSITION EGRESS POSITION 5.61 142.5mm 2.02 MAX. 51.3mm 5s
CASEMENT AWNING HEAVY DUTY H 4-BAR EGRESS HINGE (333SS-334SS Series) FIG. 4 TRUTH STANDARD DUTY 4-BAR EGRESS CASEMENT HINGE (<strong>Truth</strong> F 333SS-334SS Series) ( ) TRUTH HEAVY DUTY 4-BAR CASEMENT HINGE W/ STOP MAT'L HINGE CALLOUT & (ACTUAL LENGTH) PART NUMBER EGRESS TO WASHABILITY SST 16" 16.76" [425.7mm] 35.12.00.208 N/A SST 16" 16.72" [424.7mm] 35.13.00.208 YES PART NUMBERING SYSTEM PRODUCT NO. MODEL FINISH ASSEMBLY 35 12 00 4-BAR HINGE HEAVY DUTY EGRESS 16" LENGTH 208 NO DECORATIVE W/ STOP STD. OPEN FINISH (HINGE FEATURE) 4-BAR HINGE APPLICATION TABLE FOR CASEMENT HINGES (SIDE HUNG) (AS CERTIFIED TO AAMA 904.1) HINGE CALLOUT & (ACTUAL LENGTH) 16" 16" 16.76" [425.7mm] 16.72" [424.7mm] SASH/VENT WIDTH RANGE 18"-32" [457.2 mm-812.8 mm] 18"-32" [457.2 mm-812.8 mm] ULTIMATE (SEE NOTE #6) MAX SASH VENT WEIGHT 175 LBS AT 32" [79.4 KG AT 812.8 mm] 175 LBS AT 32" [79.4 KG AT 812.8 mm] NOTES: 1. THESE HEAVY DUTY EGRESS 4-BAR HINGES ARE RECOMMENDED FOR CASEMENT APPLICATIONS ONLY. 2. FOR ADDITIONAL RECOMMENDATIONS REGARDING 4-BAR HINGES, PLEASE REFER TO THE TRUTH TIPS SECTION AND THE TECH NOTES SECTION AT THE END OF THE CATALOG. 3. ALL 333-334 SERIES HINGES HAVE A BRASS SHOE. 4. THE STANDARD STACK HEIGHT OF A HEAVY DUTY HINGE IS .625 (15.9 mm). IF A SHIM OR WASHER IS USED THE STACK HEIGHT WILL INCREASE BY THE SHIM OR WASHER THICKNESS. 6. ULTIMATE SASH WEIGHT & WIDTH FOR HINGES AS SHOWN IN CHARTS ARE BASED ON AAMA 904.1 "SPECIFIATION FOR MULTI-BAR HINGES IN WINDOW APPLICATIONS". THESE NUMBERS DO NOT APPLY TO WINDOWS BEING TESTED TO ANSI/AMMA/WDMA 101/I.S 2/NAFS-02 "CASEMENT HARDWARE LOAD TEST". 5t
Page 2 and 3: Connecting Innovations In Hardware
Page 4 and 5: Terms & Conditions of Sale TRUTH HA
Page 6 and 7: 13 AWNING HINGES APPLICATION OF CON
Page 8 and 9: 14 CONCEALED CASEMENT HINGE 4. Trut
Page 10 and 11: 14 CONCEALED CASEMENT HINGE FIG. 2
Page 12 and 13: 2e 700 WEST BRIDGE STREET, OWATONNA
Page 14 and 15: 14 THE MAXIM® SYSTEM CASEMENT HING
Page 16 and 17: MAXI M 14 THE MAXIM® SYSTEM CASEME
Page 18 and 19: HIGH PERFORMANCE CASEMENT HINGE 3.1
Page 20 and 21: HIGH PERFORMANCE CASEMENT HINGE
Page 22 and 23: HIGH PERFORMANCE CASEMENT HINGE
Page 24 and 25: MAXIM HIGH PERFORMANCE PAGE CASEMEN
Page 26 and 27: HIGH PERFORMANCE CASEMENT HINGE 19
Page 28 and 29: HIGH PERFORMANCE CASEMENT HINGE 19
Page 30 and 31: 29 BUTT HINGES 29.10 BUTT HINGE .42
Page 32 and 33: 4-BAR HINGES GUIDE TO 4-BAR HINGE S
Page 34 and 35: STANDARD & HEAVY DUTY 4-BAR HINGES
Page 36 and 37: STANDARD DUTY 4-BAR HINGE (201SS Se
Page 42 and 43: HEAVY DUTY 4-BAR HINGE (301SS Serie
Page 48 and 49: STANDARD DUTY 4-BAR EGRESS HINGE (2
Page 52 and 53: HEAVY DUTY 4-BAR EGRESS HINGES (333
Page 54 and 55: HEAVY DUTY EGRESS/WASHABILITY 4-BAR
Page 62 and 63: SUPERIOR 4-BAR HINGE provide the ne
Page 64 and 65: 700 WEST BRIDGE STREET, OWATONNA, M
Page 66 and 67: SUPERIOR 4-BAR HINGE TRUTH SUPERIOR
Page 68 and 69: 37/99 SASH CONTROL DEVICES TRUTH TI
Page 70 and 71: 37/99 SASH CONTROL DEVICES FIG. F 3
Page 72 and 73: 37/99 SASH CONTROL DEVICES FIG. 7 A
Page 74 and 75: SAFEGARD TM CASEMENT WINDOW OPENING
Page 76 and 77: SAFEGARD TM CASEMENT WINDOW P OPENI
Page 78 and 79: 99 SNUBBERS FIG. 1 32939.XX CONCEAL
Page 80 and 81: 45 JAMB JACKS FIG. 1 INSTALLATION O
Page 82 and 83: 45 JAMB JACKS FIG. 5 JAMB JACK III
Page 84 and 85: CASEMENT AWNING 16 NON-HANDED, LOW
Page 86 and 87: 16 NON-HANDED, LOW PROFILE SASH LOC
Page 88 and 89: CASEMENT AWNING 16 HOMEGARD® SASH
Page 90 and 91: 16 HOMEGARD® SASH LOCK FIG. 1 16.5
Page 92 and 93: CASEMENT AWNING 16 ENTRYGARD® SASH
Page 94 and 95: 16 ENTRYGARD® SASH LOCK FIG. 1 APP
Page 96 and 97: CASEMENT AWNING 16 MIRAGE® CONCEAL
Page 98 and 99: 16 MIRAGE® CONCEALED MULTI-POINT L
Page 100 and 101:
16 MIRAGE® CONCEALED MULTI-POINT L
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
CASEMENT AWNING 16 SENTRY 2000® MO
Page 110 and 111:
CASEMENT AWNING 24 LOCKING HANDLE 1
Page 112 and 113:
24 LOCKING HANDLE 16b FIG. 3 LOCKIN
Page 114 and 115:
B 24 LOCKING HANDLE 16d FIG. 7 APPL
Page 116 and 117:
24 LOCKING HANDLE 16f FIG. 9 KEEPER
Page 118 and 119:
CASEMENT AWNING 24 MAXIM® MULTI-PO
Page 120 and 121:
24 MAXIM® MULTI-POINT & SINGLE POI
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
M 24 MAXIM® MULTI-POINT & SINGLE P
Page 134 and 135:
CASEMENT AWNING 15 TEMPO LOCKS 17.1
Page 136 and 137:
TEMPO LOCKS FIG. 1 TEMPO MULTI-POIN
Page 138 and 139:
TEMPO LOCKS FIG. 3A TEMPO LOCKS TIE
Page 140 and 141:
TEMPO LOCKS FIG. 6 NON HANDED ADJUS
Page 142 and 143:
CASEMENT AWNING ENCORE MULTI-POINT
Page 144 and 145:
ENCORE MULTI-POINT LOCKING SYSTEM
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
CASEMENT 24 MULTI-POINT LOCKING SYS
Page 156 and 157:
24 MULTI-POINT LOCKING SYSTEM FIG.
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
CASEMENT 15 PUSH OUT HARDWARE 20.
Page 164 and 165:
PUSH OUT HARDWARE FIG.1CLASSIC
Page 166 and 167:
PUSH OUT HARDWARE &9=%!I#$.G%K9K ?%
Page 168 and 169:
PUSH OUT HARDWARE FIG.16FRENCH
Page 170 and 171:
PUSH OUT HARDWARE 6"67*6$8)* B"&*()
Page 172 and 173:
PUSH OUT HARDWARE FIG.2612.81
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
HANDLES& LOCKSETS MORTISELOCK
Page 180 and 181:
ASCENT EURO GROOVE LOCKING SYSTEM F
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
ASCENT EURO GROOVE LOCKING SYSTEM X
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
ASCENT EURO GROOVE LOCKING SYSTEM 7
Page 198 and 199:
AWNING 25 TRIMLINE CAM HANDLE LOCKS
Page 200 and 201:
25 TRIMLINE CAM HANDLE LOCKS P FIG.
Page 202 and 203:
25 TRIMLINE CAM HANDLE LOCKS FIG. 9
Page 204 and 205:
AWNING 25 POLE-OPERATED CAM HANDLE
Page 206 and 207:
25 POLE-OPERATED CAM HANDLE LOCKS F
Page 208 and 209:
AWNING 27 TRIMLINE CAM HANDLE WITH
Page 210 and 211:
27 TRIMLINE CAM HANDLE WITH CONCEAL
Page 212 and 213:
AWNING 27 POLE-OPERATED CAM HANDLE
Page 214 and 215:
27 POLE-OPERATED CAM HANDLE WITH CO
Page 216 and 217:
AWNING 28 KEY OPERATED CUSTODIAL LO
Page 218 and 219:
28 KEY OPERATED CUSTODIAL LOCK (REM
Page 220 and 221:
CASEMENT AWNING MAXIM ® SYSTEM OPE
Page 222 and 223:
CASEMENT MAXIM ® SYSTEM OPERATORS
Page 224 and 225:
MAXIM ® DUAL ARM OPERATORS (SILL M
Page 226 and 227:
MAXIM ® DUAL ARM OPERATORS (SILL M
Page 228 and 229:
MAXIM ® DUAL ARM OPERATORS (LOW PR
Page 230 and 231:
MAXIM ® DUAL ARM OPERATORS (LOW PR
Page 232 and 233:
MAXIM ® DYAD OPERATORS (SILL MOUNT
Page 234 and 235:
MAXIM ® DYAD OPERATORS (SILL MOUNT
Page 236 and 237:
MAXIM ® DYAD OPERATORS (LOW PROFIL
Page 238 and 239:
MAXIM ® REVERSE DYAD OPERATORS (SI
Page 240 and 241:
MAXIM ® REVERSE DYAD OPERATORS (SI
Page 242 and 243:
MAXIM ® REVERSE DYAD OPERATORS (LO
Page 244 and 245:
MAXIM ® SINGLE ARM OPERATORS (SILL
Page 246 and 247:
MAXIM ® SINGLE ARM OPERATORS (SILL
Page 248 and 249:
MAXIM ® SINGLE ARM OPERATORS (LOW
Page 250 and 251:
MAXIM ® SINGLE ARM OPERATORS (LOW
Page 252 and 253:
MAXIM ® AWNING OPERATORS (SILL MOU
Page 254 and 255:
MAXIM ® NARROW OPERATORS FIG. 1 AP
Page 256 and 257:
MAXIM ® NARROW OPERATORS (SILL MOU
Page 258 and 259:
CASEMENT AWNING THE MAXIM ® SYSTEM
Page 260 and 261:
MAXIM ® AWNING OPERATORS Hardware
Page 262 and 263:
CASEMENT AWNING ENCORE SYSTEM OPER
Page 264 and 265:
ENCORE SYSTEM OPERATORS ENCORE DUA
Page 266 and 267:
ENCORE DUAL ARM OPERATOR (SILL MOU
Page 268 and 269:
ENCORE DUAL ARM OPERATOR (SILL MOU
Page 270 and 271:
ENCORE DUAL ARM OPERATOR (LOW PROF
Page 272 and 273:
ENCORE DUAL ARM OPERATOR (LOW PROF
Page 274 and 275:
ENCORE DYAD OPERATOR (SILL MOUNT)
Page 276 and 277:
ENCORE DYAD OPERATOR (SILL MOUNT)
Page 278 and 279:
ENCORE DYAD OPERATOR (LOW PROFILE)
Page 280 and 281:
ENCORE REVERSE DYAD OPERATOR (SILL
Page 282 and 283:
ENCORE REVERSE DYAD OPERATOR (SILL
Page 284 and 285:
ENCORE REVERSE DYAD OPERATOR (LOW
Page 286 and 287:
ENCORE SINGLE ARM OPERATORS (SILL
Page 288 and 289:
ENCORE SINGLE ARM OPERATORS (SILL
Page 290 and 291:
ENCORE SINGLE ARM OPERATORS (LOW P
Page 292 and 293:
ENCORE SINGLE ARM OPERATORS (LOW P
Page 294 and 295:
ENCORE AWNING OPERATOR (SILL MOUNT
Page 296 and 297:
ENCORE SYSTEM OPERATORS FIG. 1 APP
Page 298 and 299:
ENCORE SYSTEM OPERATORS FIG. 3 ENC
Page 300 and 301:
MAXIM ® AWNING OPERATORS 25oo 700
Page 302 and 303:
THE ENCORE SYSTEM OPERATOR ACCESSO
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
15 ENTRYGARD® DUAL ARM OPERATOR TR
Page 310 and 311:
15 ENTRYGARD® DUAL ARM OPERATOR FI
Page 312 and 313:
15 ENTRYGARD® DUAL ARM OPERATOR FI
Page 314 and 315:
700 WEST BRIDGE STREET, OWATONNA, M
Page 316 and 317:
15 ENTRYGARD® DYAD OPERATOR TRUTH
Page 318 and 319:
15 ENTRYGARD® DYAD OPERATOR FIG. 2
Page 320 and 321:
15 ENTRYGARD® DYAD OPERATOR FIG. 5
Page 322 and 323:
15 ENTRYGARD® SINGLE ARM OPERATOR
Page 324 and 325:
15 ENTRYGARD® SINGLE ARM OPERATOR
Page 326 and 327:
11 ENTRYGARD® AWNING OPERATOR 5. A
Page 328 and 329:
11 ENTRYGARD® AWNING OPERATOR FIG.
Page 330 and 331:
Page 332 and 333:
15 ELLIPSE SINGLE ARM OPERATOR 7. A
Page 334 and 335:
15 ELLIPSE SINGLE ARM OPERATOR FIG.
Page 336 and 337:
15 ELLIPSE P SINGLE ARM OPERATOR FI
Page 338 and 339:
700 west bridge street, owatonna, m
Page 340 and 341:
15 ELLIPSE DYAD OPERATOR TRUTH TIPS
Page 342 and 343:
15 ELLIPSE DYAD OPERATOR FIG. 2 ELL
Page 344 and 345:
15 ELLIPSE DYAD OPERATOR FIG. FIG.
Page 346 and 347:
15 ELLIPSE SINGLE ARM AWNING OPERAT
Page 348 and 349:
PAGE 3.23C; SCALE: 3:1 (.3333333 IN
Page 350 and 351:
Page 352 and 353:
15 TRADITIONAL STYLE SINGLE ARM OPE
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
15 TRADITIONAL STYLE DYAD OPERATOR
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
15 TRADITIONAL STYLE SINGLE ARM AWN
Page 366 and 367:
15 TRADITIONAL STYLE SINGLE ARM AWN
Page 368 and 369:
Page 370 and 371:
23 SINGLE ARM OPERATOR (FACE-MOUNT)
Page 372 and 373:
23 SINGLE ARM OPERATOR (FACE-MOUNT)
Page 374 and 375:
23 DYAD OPERATOR TRUTH TIPS (con't)
Page 376 and 377:
23 DYAD OPERATOR FIG. 2 DYAD OPERAT
Page 378 and 379:
23 DYAD OPERATOR FIG. 5 23.54 and 2
Page 380 and 381:
23 DYAD OPERATOR FIG. 8 STUD BRACKE
Page 382 and 383:
Page 384 and 385:
12 TELESCOPING PUSH BAR OPERATORS F
Page 386 and 387:
Page 388 and 389:
22 PIVOT SHOE OPERATOR Window opera
Page 390 and 391:
22 PIVOT SHOE OPERATOR FIG. 4 GASKE
Page 392 and 393:
22 SCISSORS ARM OPERATOR TRUTH TIPS
Page 394 and 395:
22 SCISSORS ARM OPERATOR FIG. 2 FRO
Page 396 and 397:
22 SCISSORS ARM OPERATOR FIG. 7 GAS
Page 398 and 399:
11 AWNING OPERATOR TRUTH TIPS (con'
Page 400 and 401:
11 AWNING OPERATOR FIG. 3 ROTO GEAR
Page 402 and 403:
Page 404 and 405:
10 LEVER OPERATOR 7. For metal wind
Page 406 and 407:
10 LEVER OPERATOR FIG. 5 SASH HOOK
Page 408 and 409:
42 MANUAL SKYLIGHT OPERATOR SYSTEM
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
SENTRY II WLS POWER WINDOW SYSTEMS
Page 418 and 419:
SENTRY II WLS POWER WINDOW SYSTEMS
Page 420 and 421:
Page 422 and 423:
SENTRY II HS MOTOR SYSTEM 46a Up to
Page 424 and 425:
SENTRY II HS MOTOR SYSTEM F FIG. 3
Page 426 and 427:
MARVEL POWER WINDOW SYSTEM light op
Page 428 and 429:
MARVEL POWER WINDOW SYSTEM (Snap Br
Page 430 and 431:
MARVEL POWER WINDOW SYSTEM (Snap Br
Page 432 and 433:
MARVEL POWER WINDOW SYSTEM (Pull Pi
Page 434 and 435:
99 STUD BRACKETS & TRACK FIG. 1 SIN
Page 436 and 437:
99 STUD BRACKETS & TRACK FIG. 9 STU
Page 438 and 439:
99 STUD BRACKETS & TRACK FIG. 17 ST
Page 440 and 441:
99 STUD BRACKETS & TRACK 48g 700 WE
Page 442 and 443:
99 ACCESSORY ITEMS FIG. 1 APPLICATI
Page 444 and 445:
99 ACCESSORY ITEMS FIG. 16 SPLINE C
Page 446:
99 ACCESSORY ITEMS FIG. 24 ADA OPER
show all

concealed - Truth Hardware

Create successful ePaper yourself

Delete template?

Save as template?