Haas lifting instruction_lathe and mill
Haas lifting instruction_lathe and mill
Haas lifting instruction_lathe and mill
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Haas</strong> Technical Publications<br />
Lifting Instructions<br />
UMC-750 Placard<br />
Refer to the <strong>lifting</strong> placard for the UMC-750. Attach chains to the <strong>lifting</strong> points as shown. Ensure that the<br />
chains do not contact the sheet metal enclosure or electrical cables.<br />
UMC-750<br />
72"<br />
(1830 mm) Min. 144" ea.<br />
(3700 mm)<br />
Min. 192"<br />
(4900 mm)<br />
Each bracket<br />
4x 3/4" SHCS<br />
320 ft-lb (435 Nm)<br />
UMC-750<br />
18000 lb<br />
(8200 kg)<br />
29-0929 Rev A<br />
© 2012 <strong>Haas</strong> Automation, Inc.<br />
Remove this bracket before<br />
operating the machine.<br />
ES0246 Rev AN Jan 2013 Page 29 of 31