TT-RISER-KIT DAB-9 - Pentair Thermal Controls

Installing the Dabico Pit cover 

There should be no interference from the pail when the 

cover is installed. If you sense interference when installing 

the cover, do not force the cover on. Instead remove the 

cover and inspect the pail position within the center of the 

pit, and relative to the metal posts. If necessary, remove the 

pail to inspect the positioning of the wire cage and cable 

loop wiring, making sure nothing is interfering with the pail 

lip resting evenly on the ground surface. 

Removing the pail 

If you need to remove the pail, you will need to raise one lip 

of the pail to a metal post, then push the pail wall firmly away 

from the post-while sliding the pail up and past the metal 

post. Once the pail lip has passed the metal post, the pail 

can be tilted at about a 30 degree angle to bring it out of the 

Dabico pit. 

WWW.THERMAL.PENTAIR.COM 

NORTH AMERICA 

Tel: +1.800.545.6258 

Fax: +1.800.527.5703 

Tel: +1.650.216.1526 

Fax: +1.650.474.7215 

thermal.info@pentair.com 

Europe, Middle East, Africa 

Tel: +32.16.213.511 

Fax: +32.16.213.603 


Asia Pacific 

Tel: +86.21.2412.1688 

Fax: +86.21.5426.2917 

cn.thermal.info@pentair.com 

Latin America 

Tel: +55.11.2588.1400 

Fax: +55.11.2588.1410 


Pentair and TraceTek are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the 

right to change specifications without prior notice. 

© 2011-2013 Pentair. PN P000000717 

THERMAL MANAGEMENT SOLUTIONS EN-TraceTekTTRiserKitDAB9-IM-H58753 01/13 

4 / 4

Previous page

Next page

1

2

3

4

TT-RISER-KIT DAB-9 - Pentair Thermal Controls

Create successful ePaper yourself

Delete template?

Save as template?