POWER GEN Europe - BET Aachen

TH 214-111013
Beyond 60% – pioneering H-class
efficiency with world class flexibility
www.siemens.com/energy
Tried, tested, and proven under real operating conditions
in Irsching, Germany, the new SCC5-8000H single-shaft
power plant with the innovative Siemens SGT5-8000H
gas turbine has set a pioneering world record for combined
cycle plants – with an energy efficiency of over 60 percent.
Environmentally responsible power generation
With its extra two percentage points of efficiency compared
to standard F-series combined-cycle power plants,
every SCC5-8000H single-shaft power plant prevents
approximately 43,000 metric tons of carbon-dioxide
emissions annually.
Highest customer value
Siemens plant solutions provide an optimal balance
between capital costs, plant performance, and operational
and maintenance considerations. Thanks to its fully aircooled
design, the SGT-8000H series gas turbine features
the highest possible reliability and availability, drastically
reducing life-cycle costs. The Benson HRSG achieves steam
temperatures of 600 °C required to break through the
60 % efficiency barrier. As a result, single-shaft SCC-8000H
series power plants offer you maximum value and long-term
investment security.
Meet us at
Russia Power
March 5–7,
2012
Moscow, Russia
Proven in
8,000 EOH
and in
commercial
operation
Highest flexibility
The plant’s daily start/shutdown and cycling capabilities
as well as the fast start-up concept – with up to half
a GW in half an hour – support intermediate load requirements
and foster high efficiency and low emissions in
part-load operation. With a combined-cycle power output
of 570 MW at 50 Hz and 410 MW at 60 Hz, the singleshaft
SCC-8000H series represents a new foundation
for sustainable success.
Answers for energy.