Manual - Ruberkon

In the event the model has crashed.
Inspect the flybar, rotor shaft and the blade spindle to make sure they are not bent at all. If any item is damaged, it
must be replaced by a new part to ensure safe operation. Do not glue any broken or damaged plastic part. Do not
repair broken rotor blades. Always inspect the following items immediately:
(a). Engine starting shaft.
(b). All the gears.
(c). Main shaft, flybar and blade feathering spindle.
(d). Tail boom and supports for cracks.
(e). Drive shaft for the tail rotor.
(f). Vertical and horizontal fins.
(g). Tail rotor shaft and control system.
(h). Main and tail rotor blades.
(i). Main frame.
51