Unipro 5004

Unipro 5004 gives you value for money
- The best choice if don’t need split times and the
possibility to transfer and analyse data on your PC.
Top quality and many features
With 5004 you can get access to lap times, high
and low values for engine revolutions, temperature
(water or cylinder head) and speed.
Indeed valuable information when you want to
improve your lap times. 5004 also works with the
Unipro Data Analyser so you can transfer data from
the Laptimer to the Data Analyser and print them
on the mobile DPU-Printer.
The 5004 also delivers engine timers, tire counters
and many other advanced features.
Unipro 5004
Features
Two-Way System
Thin Aluminium Casing
Easy to Operate
Accurate RPM Calculation
Speed and Position Data
Your Choice of Receiver Type
There is only one cable going to the steering wheel. This ensures a sturdy
connection and reliable operation.
This elegant and durable display casing is just 15 millimetres and made of high
quality aluminium.
Select the information you want to display. The large function buttons make it
easy to scroll through data and get a quick overview of your results.
Unipro Laptimers use the most advanced measuring system available. While
many other systems measure engine revolutions as an average over several
metres, Unipro calculates with an accuracy of approximately 15 cm.
The Speed Kit tracks your speed and position. The kit is very easy to install and
delivers precise measurements and data for analysis of your results.
Choose between Loop (AMB system), magnet and IR receiver.
See pricing and details on uniprolaptimer.com

Unipro 5004
SETUP
Easy access
to Laptimer
settings.
LED LAMPS
2 adjustable LED lamps for
temperature warnings.
DISPLAY BOX
High quality aluminium casing,
connected to the updateable
main box with only one cable to
the steering wheel.
Actual Size
IrDA
Infrared
connection to
Data Analyser
for download of
data or update
of software.
MODE
Turn the Laptimer
on/off, and switch
between modes with
the MODE button.
UP/DOWN
UP/DOWN arrows are
used to scroll through
the laps in pit mode.
FUNC
Confirm choices in the
setup.
ADVANCED
DISPLAY
Choose which
data you want
to see in each
sector of the
large display.
Unipro 5004 Kit Options
Laptimer 5004 Basic kit
Laptimer 5004 Temp kit
Laptimer 5004 Speed kit
Laptimer 5004 Big kit
Includes active RPM sensor and optional receiver (Loop, magnet or IR).
Includes active RPM sensor, water or cylinder head sensor and optional receiver
(Loop, magnet or IR).
Includes active RPM sensor, speed kit and optional receiver (Loop, magnet or IR).
Includes active RPM sensor, water or cylinder head sensor, speed kit and optional
receiver (Loop, magnet or IR).
Additional accessories are available for all kits.
See pricing and details on uniprolaptimer.com