Download Owner's manual - Royal Enfield
Download Owner's manual - Royal Enfield
Download Owner's manual - Royal Enfield
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPARK PLUG<br />
Cleaning and adjusting Plug gap<br />
<br />
<br />
<br />
<br />
<br />
<br />
Two spark plugs are<br />
provided in your<br />
vehicle<br />
Remove spark plug<br />
using the plug<br />
spanner and tommy<br />
bar.<br />
Clean the insulator<br />
tip and electrodes of<br />
the plug carefully<br />
using a pointed<br />
scraper or spark plug<br />
cleaner.<br />
Set the gap between<br />
0.70 to 0.80 mm.<br />
Refit the spark plug<br />
on the cylinder head.<br />
Gap 0.70 to 0.80 mm.<br />
Repeat the above procedure for the secondary<br />
sparkplug.<br />
D O I T Y O U R S E L F<br />
INSPECTION OF TYRES AND WHEELS<br />
Inspect the tyres periodically for<br />
tread wear, cracks and cuts.<br />
Minimum tread depth :<br />
Front tyre : 1mm<br />
Rear tyre : 2 mm<br />
Check and remove stone, splinters,<br />
nails or other particles embedded<br />
in the tyre treads.<br />
Bald spots / swelling may be caused by<br />
internal damage. Replace the tyres, if<br />
defective.<br />
Replace tyres when the tread depth has reached<br />
the minimum as specified.<br />
Periodically inspect wheels for spokes<br />
breakage and wheel rim run out.<br />
Check proper seating of the tyre beading on<br />
the rim whenever the tyre is reassembled.<br />
Whenever a new tyre is installed, ensure rim<br />
and spokes do not get damaged on account<br />
of using wrong levers.<br />
Use only standard tyres & tubes inflated to<br />
correct pressure.<br />
35