Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Drainage<br />
Easi-Pit (DN 1050 Catch-pit)<br />
P30<br />
DN 1050 Precast Catchpit<br />
The DN1050 catchpit effectively provides a sealed sump manhole, a monolithic precast<br />
concrete unit fitted with connector seals which can be used to connect to the following<br />
types of pipe: uPVC, twinwall, clay, ductile iron and concrete. The catchpit is designed<br />
to accommodate pipe sizes DN150 to DN450. The catchpit is designed in line with<br />
highway specification.<br />
<strong>FP</strong> <strong>McCann</strong> can produce catchpits upto DN375 in a straight through orientation (180<br />
degrees). 4-way units with orientations at 90 degrees can be produced upto DN300<br />
only; beyond DN300 4-way orientations are not available. DN450 inlets must be cored<br />
onsite.<br />
Easi-Pit weight 1.38tonnes.<br />
Benefits of using the DN1050 catchpit unit<br />
• Creates an immediate watertight structure<br />
• Cost benefits with reduction in construction time and resource requirement<br />
• Economically advantageous as limited wet trades are required in the manhole<br />
construction<br />
• Accommodates connection to all types of pipe used in road and manhole<br />
construction<br />
• Safety benefits gained in the construction of manholes as the pre-formed sump<br />
and connector seals eliminate on site construction, thus greatly reducing labour<br />
activity within the manhole<br />
• Increased confidence to meet industry standards<br />
• Quality is greatly increased as construction is within the factory environment<br />
• Eliminates material wastage associated with current in-situ method<br />
• Yields environmental benefits with less concrete used on site and less excavated<br />
material removed from site<br />
DN1050 Catchpit Dimensions<br />
DN45mm (x3)<br />
DN150mm - DN450mm<br />
Invert Level 300mm<br />
Drain Hole (80mm O.D.)<br />
to accommodate 65mm nominal bore pipe<br />
Note: Standard unit will have an<br />
invert level of 300mm for inlet and<br />
outlet pipes. If a non-standard invert<br />
level is required, please specify<br />
when ordering.<br />
Easi-Base is a<br />
kitemark product,<br />
manufactured and tested<br />
to BSEN1917:2002<br />
Pipes should only be connected to the Easi-Pit using an <strong>FP</strong> <strong>McCann</strong><br />
approved lubricant<br />
WARNING<br />
When Lifting ≥45°<br />
Inclined pull only<br />
30<br />
www.fpmccann.co.uk<br />
precast@fpmccann.co.uk
Change language