Autopilot System Installation Instructions - New Holland PLM Portal
Autopilot System Installation Instructions - New Holland PLM Portal
Autopilot System Installation Instructions - New Holland PLM Portal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 – Hydraulic Control Valve <strong>Installation</strong><br />
Making the hydraulic hose connections<br />
Steering line connections<br />
Step 1<br />
Locate the clamped steel lines on the<br />
left side of the engine. Label the upper<br />
line and hose as B and the lower line<br />
and hose as A, as shown.<br />
Disconnect the hoses.<br />
L<br />
M<br />
Step 2<br />
Disconnect the steering hoses from the<br />
A and B hard lines. Route the steering<br />
hoses to the V1 and V2 ports of the<br />
DCBV.<br />
L<br />
M<br />
Step 3<br />
Connect the C1 c and C2 d hoses to<br />
the A and B hard lines, where the hoses<br />
were removed from in Step 2 above.<br />
Route the C1 and C2 hoses to the C1<br />
and C2 ports of the DCBV.<br />
c<br />
d<br />
AUTOPILOT AUTOMATED STEERING SYSTEM INSTALLATION INSTRUCTIONS<br />
34