- Page 1: Aluminium Casting Alloys
- Page 5 and 6: Introduction Many of you have most
- Page 7 and 8: Due to its future-oriented corporat
- Page 9 and 10: Aluminium and aluminium casting all
- Page 11 and 12: Product range and form of delivery
- Page 13 and 14: Selecting aluminium casting alloys
- Page 15 and 16: Table 2 Classifi cation of casting
- Page 17 and 18: needs to be offset as far as possib
- Page 19 and 20: Infl uencing the microstructural fo
- Page 21 and 22: Modifi cation of AlSi eutectic (ref
- Page 23 and 24: fi rst addition of sodium. If such
- Page 25 and 26: Avoiding impurities Ingot quality A
- Page 27 and 28: Cleaning and degassing the melt Our
- Page 29 and 30: Determination of insoluble non-meta
- Page 31 and 32: Selecting the casting process As me
- Page 33 and 34: Demands on the casting system To ke
- Page 35 and 36: Casting-compliant design The follow
- Page 37 and 38: Solidifi cation simulation and ther
- Page 39 and 40: As already shown in the section on
- Page 41 and 42: Solution annealing To bring the har
- Page 43 and 44: If the heat treatment does not work
- Page 45 and 46: Welding and joining aluminium casti
- Page 47 and 48: The process operates mostly under h
- Page 49 and 50: Despite careful acid cleaning, a la
- Page 51 and 52: Notes on the casting alloy tables T
- Page 53 and 54:
The 10 per cent aluminium-silicon c
- Page 55 and 56:
Al SiCu casting alloys Chemical com
- Page 57 and 58:
Casting alloys for special applicat
- Page 59 and 60:
Eutectic aluminium-silicon casting
- Page 61 and 62:
Mechanical properties at room tempe
- Page 63 and 64:
Near-eutectic wheel casting alloys
- Page 65 and 66:
Application notes These casting all
- Page 67 and 68:
Casting characteristics and other p
- Page 69 and 70:
Heat treatment of aluminium casting
- Page 71 and 72:
The 7 and 5 per cent aluminium-sili
- Page 73 and 74:
Mechanical properties at room tempe
- Page 75 and 76:
Application notes These casting all
- Page 77 and 78:
Casting characteristics and other p
- Page 79 and 80:
Heat treatment of aluminium casting
- Page 81 and 82:
AlMg casting alloys Chemical compos
- Page 83 and 84:
Mechanical properties at room tempe
- Page 85 and 86:
Application notes We produce Al Mg3
- Page 87 and 88:
Casting alloys for special applicat
- Page 89 and 90:
Casting characteristics and other p
- Page 91 and 92:
Mechanical properties at room tempe
- Page 93 and 94:
Heat treatment of aluminium casting
- Page 95 and 96:
High-strength casting alloy Applica
- Page 97 and 98:
Piston alloys Application notes The
- Page 99 and 100:
Rotor aluminium Application notes T
- Page 101 and 102:
We have taken the relevant speciali