Stepper drives Servostep drives Controllers 2012

Drives for all applications
SlimLine Drives
Easy-to-use and versatile Smart-Light-Integration-Motion
drives line. The Full Digital technology series are developed
to meet the growing demand for high qualitative and fair
priced drives, and are characterized by a basic but complete
set of drives engineered with the objective to reach the best quality
against restrained production costs.
The line is divided in LW Hardware controlled and SW Software controlled
electronics: to the first category belong all Low End models controlled
by means of digital Step & Direction signals of a master unit (PLC);
the second category includes all High End models configurable through
software by the user to function in fieldbus networks or programmables
by means of eePLC software, an IDE to execute controls in standalone
mode and PLC functions.
SD Enhanced Drives
The SD electronics family is a high performance Full
Digital drives series, with advanced functionalities for
micro-step control of the motor in open loop and stepless mode control
in closed loop of torque, velocity and position, controlling the motor
as a servomotor (servo step). The SD series groups f 4 d 2 technology
(Fast Forward Feed Full Digital Drive) devices equipped with firmware
designed to suit every control situation as follows: drives controlled by
means of digital or analogue clock & direction signals from a master
unit, drives controlled through CANbus fieldbus, profibus or serial interface,
drives able to execute standard or customized applications in ‘standalone’
mode, making use of MS Windows PC software environments to
configure the working parameters and drives that are free programmable
by the user by means of ATOMIC IDE.
Products lines
Integrated SM drives
The SM line includes a series of devices based on f 4 d 2 technollogy
(Fast Forward Feed Full Digital Drive) integrating motor,
intelligent drive and, in the closed loop version with typical servomotor performances
in closed loop of torque, velocity and position an incremental
or absolute feedback encoder. The line is designed to simplify electrical
switchboards and wiring in single or multi axles installations through devices
characterized by a minimal heat dissipation adapted for use at maximal
power, and offering mechanical robustness and reliability of use also under
heavy working conditions regarding vibrations and temperature. The SM
series is composed of devices equipped with firmware designed for CANbus
fieldbus control, profibus or serial interface control, able to work in
‘standalone’ mode in standard or customized applications. The drives are
configurable through the working parameters by means of MS Windows PC
software or free programmable by the user by means of ATOMIC IDE.
6