CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Command Mode<br />
Example<br />
Interface Configuration Mode (interface gigabitEthernet / interface range<br />
gigabitEthernet)<br />
Specify the <strong>Link</strong> Type of port 3 as trunk:<br />
TL-SG3424(config)# interface gigabitEthernet 1/0/3<br />
TL-SG3424(config-if)# switchport mode trunk<br />
switchport access vlan<br />
Description<br />
Syntax<br />
Parameter<br />
The switchport access vlan command is used to add the desired Access port<br />
to IEEE 802.1Q VLAN. To remove the specified port/ports from the<br />
corresponding VLAN, please use no switchport access vlan command.<br />
switchport access vlan vlan-id<br />
no switchport access vlan<br />
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 2 to 4094.<br />
Command Mode<br />
Example<br />
Interface Configuration Mode (interface gigabitEthernet / interface range<br />
gigabitEthernet)<br />
Specify the <strong>Link</strong> Type of port 3 as access and add it to VLAN 2:<br />
TL-SG3424(config)# interface gigabitEthernet 1/0/3<br />
TL-SG3424(config-if)# switchport mode access<br />
TL-SG3424(config-if)# switchport access vlan 2<br />
switchport trunk allowed vlan<br />
Description<br />
Syntax<br />
The switchport trunk allowed vlan command is used to add the desired Trunk<br />
port to IEEE 802.1Q VLAN. To delete the corresponding VLAN/VLANs, please<br />
use no switchport trunk allowed vlan command.<br />
switchport trunk allowed vlan vlan-list<br />
20
Change language