NEWS 2005 - Jan Havelka
NEWS 2005 - Jan Havelka
NEWS 2005 - Jan Havelka
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Solid Carbide End Mill Rougher for Aluminum<br />
Application Data<br />
DOC/ap<br />
DOC/ap<br />
WOC/ae<br />
1) These guidelines may require possible variations to achieve optimum results.<br />
2) For WOC equal to .5 x diameter on profiling applications, decrease feed by 25%.<br />
Aluminum and other Free-Machining, Non-Ferrous Materials, Low Silicon<br />
Aluminum, 6061, 6063, 7075,<br />
DIN/ISO: AlMg1SiCu, AlMg0,5Mn, AlZn5,5MgCu<br />
INSERTS<br />
Cutting<br />
Speed SFM Vc<br />
K600 600-1800 180-550<br />
Reduce speed by 20% for<br />
slotting applications.<br />
Application Parameters<br />
Profiling<br />
Slotting<br />
Diameter<br />
mm inch<br />
DOC/ap WOC/ae<br />
1.5 x dia. .5 x dia<br />
1 x dia. –<br />
Profiling<br />
Slotting<br />
fz Feed/Tooth fz Feed/Tooth<br />
mm inch mm inch<br />
6 1/4 0,051 .0020 0,038 .0015<br />
8 3/16 0,064 .0025 0,051 .0020<br />
10 3/8 0,076 .0030 0,064 .0025<br />
12 1/2 0,102 .0040 0,076 .0030<br />
16 5/8 0,127 .0050 0,102 .0040<br />
20 3/4 0,160 .0060 0,114 .0045<br />
25 1 0,178 .0070 0,152 .0060<br />
DIE & MOLD<br />
SLOTTING / HELICAL<br />
MILLING<br />
END MILLING<br />
FACE MILLING<br />
To place an order, contact your Kennametal<br />
representative or visit www.kennametal.com.<br />
B73
Change language