Dlr2 & Sl Owner's Manual Supplement - lesrouleuxdewailly - Free
Dlr2 & Sl Owner's Manual Supplement - lesrouleuxdewailly - Free
Dlr2 & Sl Owner's Manual Supplement - lesrouleuxdewailly - Free
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
adjustments<br />
Suggested Air Pressure<br />
To set pressure, remove the valve cap at the bottom of the fork. Set the pressure according<br />
to rider weight. Use a bicycle suspension pump. Consult the table below. Stay within the<br />
pressure limits.<br />
At the bottom of the fork:<br />
Pressure Limits<br />
MIN. - 50 psi<br />
MAX. - 225 psi<br />
CAUTION<br />
Clean the valve and pump end<br />
before attaching a pump. Pumping<br />
in dirt can quickly ruin the fork. Stay<br />
within the pressure limits<br />
SCHRADER<br />
VALVE<br />
VALVE CAP<br />
NEG.<br />
SPRG.<br />
CARBON SL<br />
DLR2<br />
RIDER WT. (lbs) RUSH SCALPEL RUSH SCALPEL<br />
120 80 85 85 90<br />
130 85 90 90 95<br />
140 90 95 100 105<br />
150 100 105 105 110<br />
160 105 110 110 115<br />
170 110 115 120 125<br />
180 120 125 125 130<br />
190 125 130 135 140<br />
200 130 135 140 145<br />
210 135 140 145 150<br />
220 145 150 155 160<br />
This table lists approximate air pressure values. It is important after setting the air pressure to<br />
add or release pressure to set the sag. See next page<br />
10
Change language