the Conservation Rooflight® Pleated Blind Installation Manual
the Conservation Rooflight® Pleated Blind Installation Manual
the Conservation Rooflight® Pleated Blind Installation Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Pleated</strong> <strong>Blind</strong> <strong>Installation</strong> <strong>Manual</strong>Step 9.0The black guide wires running between <strong>the</strong> head and cill unit should be in tension in order for<strong>the</strong> blind system to run smoothly. If extra tension is required, turn <strong>the</strong> screw(s) on <strong>the</strong> cill unit(Part J) counter clockwise by approximately 3 turns to release <strong>the</strong> wire(s).Step 9.1Increase <strong>the</strong> tension in <strong>the</strong> systemby pulling down on <strong>the</strong> black guidewire(s) nearest to <strong>the</strong> screw(s) on<strong>the</strong> cill unit (Part J). Pull all wireslack through <strong>the</strong> system.14 Issue 01 | March 2011
Change language