VNS2010 - Visiplex

VNS2010 Wireless PA Speaker/Remote Device ControllerThe VNS2010 is a discrete, compact, wireless PAspeaker controller with a remote contolled switch towirelessly activate remote devices such as strobelight, sirens and other electronic devices. Thisdevice is ideal for many applications where theinstallation of traditional hard-wired speakers wouldbe impractical or impossible. The VNS2010 may beused independently or to enhance existing bell andPublic Address systems.Recommended with:VNS2084VNS2081 VNS2086 VNS209XSolutions for:• Schools• Manufacturing Plants• Military Bases• Campuses• Government Facilities• Office Buildings• Medical Centers• Shopping MallsThe VNS2010's controlled devices can be activatedindividually or as a group, allowing you to playbell and alert tones, send pre-programmed voicemessages and make live voice announcements. Thespeaker volume can be remotely set to one of fourlevels with each activation. The VNS2010's setupparameters can be reprogrammed over-the-air fromthe main encoder/transmitter.The VNS2010 comes in a weatherproof enclosure forindoor and outdoor applications. An internal powerbackup battery is also available for uninterruptedoperation during a power outage.Features:• Converts ordinary speakers to wirelessspeakers• Built-in 25-Watt audio amplifier• Built-in 10A Dry Contact switch relay• Group and zone paging capabilities• Designed for indoor and outdoor installations• Built-in preprogrammed alert tones• Internal power backup battery

Technical SpecificationsPaging Format:POCSAG 512/1200 BPS, voiceand data with optional securedcommunication mode. Six capcodesfor individual and group/zone paging.Memory:VNS2010Eight (8) internal pre-programmedalert / bell tones and voice prompts.Optional voice storage for up to 20user programmable messages.Audio Power:Frequency Response:25 Watts Adjustable50Hz - 16KHz (100Hz - 3400Hz inlive voice mode)Interface:Remote Control:Built-in RS-232 port for PCprogramming and setup.Built-in 10A Dry Contact switch relayRF Band:FM, narrow band, VHF 148 -174MHzand UHF 400 - 470MHzPower:Operates from a 18 VDC 3A ACpower adaptor.Power backup:Internal battery option that canprovide power for up to 48 hours instandby mode and 60 minutes in fullpower continuous activation mode.Weight:Dimensions:0.85 lb. (2.10 lb. with internal battery)7.5” wide x 5.1” high x 2.7” deep,wall mount.AlertWave - Wireless Emergency Mass Notification System