SAFETY P R A C TIC E S - gnssn - International Atomic Energy Agency

This publication is no longer validPlease see http://www-ns.iaea.org/standards/*466 High Voltage Insulation-Enclosed Switchgear and Control Gear(1974), First Edition, Amendment No. 1 (1977), AmendmentNo. 2 (1978), Amendment No. 3 (1979)*5 4 4 -1 Guide for Determining the Effects of Ionizing Radiation onInsulating Materials; Part 1: Radiation Interaction (1977), FirstEdition*544-2 Guide for Determining the Effects of Ionizing Radiation onInsulating Materials; Part 2: Procedures for Irradiation (1979),First Edition*544-3 Guide for Determining the Effects of Ionizing Radiation onInsulating Materials; Part 3: Test Procedures for PermanentEffects (1979), First Edition*599 Interpretation of the Analysis of Gases in Transformers andOther Oil-Filled Electrical Equipment in Service (1978), FirstEdition*605 Equipment Reliability Testing (Parts 1, 5, 7)*606 Application Guide for Power Transformers (1978), FirstEdition*695-1 Fire Hazard Testing; Part 1: Guidance for the Preparation ofRequirements and Test Specifications for Assessing FireHazard of Electrotechnical Products*695-2 Fire Hazard Testing; Part 2: Test Methods*695-3 Fire Hazard Testing; Part 3: Examples of Fire Hazard AssessmentProcedures and Interpretation of Results*706-1 Guide On Maintainability of Equipment; Part 1: Sections One,Two and Three. Introduction, Requirements and MaintainabilityProgramme (1982), First Edition*709 Separation within the Reactor Protection System (1981), FirstEdition*727 Evaluation of Electrical Endurance of Electrical InsulationSystems*744 Safety Logic Assemblies of Nuclear Power Plants. Characteristicsand Test Methods (1983), First Edition*780 Qualification of Electrical Items of the Safety System of NuclearPower Stations*980 Recommended Practices for Seismic Qualification of ElectricalEquipment of the Safety System for Nuclear GeneratingStations71