3202 Rev A Module Specifications - Advanced Micro Controls Inc

Backplane Home Proximity Bit with Home Limit Switch3202 Rev A Module SpecificationsTwo Channel ControlLogix Stepper ModuleRevision 4.01. Accelerates toprogrammed speed2. Runs at theprogrammed speed3. Detects backplane proximity bit anddecelerates to the starting speed.4. Runs at the starting speed.5. Detects Home LimitSwitch and stops.Marker Pulse and Proximity Switch (Either backplane bit or the Home LimitSwitch treated as a Proximity Switch)1. Accelerates toprogrammed speed2. Runs at theprogrammed speed3. Marker Pulse Ignored4. Detects Proximity Switch andDecelerates to the starting speed5. Runs at the starting speed.6. Detects 1 st Marker Pulse after theProximity and StopsReaching an End Limit Switch during a Homing Operation1. Runs at the Programmed Speed4. Waits for the HomeInput to turn On thenOff.2. Reaches the end Limit Switch,stops without deceleration, andwaits for two seconds3. Turns at the programmed speed oppositeto the requested direction5. Returns at the starting speed to where the HomeInput was detected. Continues to Marker Pulse orHome Limit Switch if applicable.Note: The Home Input shown above can be either the Home Limit Switch or the Backplane Proximity bit.20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786 page: 21Tel: (860) 585-1254 Fax: (860)584-1973 E-mail: Sales @amci.com