Cooling/Casting - Spraying Systems Co.

Spangling/Cold Strip MillAir Atomizing Nozzles/Spray ControlHundreds of Air Atomizing Options forDozens of Cold Mill OperationsAir atomizing nozzles are among the most versatile of spray nozzle types withmany diverse uses in mills. Zinc dip, galvanizing, soft quenching and oiling arejust a few of the more common applications. Our line of air atomizing nozzlesis extensive with a wide choice of air and liquid inlet locations, built-in strainersand check valves and multiple spray assemblies. Whether it be an applicationwhere drop size control is critical as in the galvanizing line or where rapidquenching is the goal, Spraying Systems Co. offers a wide variety of productswith different operating characteristics. Plus, we offer a wide variety of materials,spray angles and flow rates. Various mounting options are also available.Optimize the Performance of Your AutomaticSpray Nozzles with Integrated Spray ControlPowered by SprayLogic ® firmware and software, AutoJet ®Spray Controllers accurately monitor and precisely adjust sprayvariables. Our controllers can monitor and control multiplespray nozzles or manifolds and include eight built-in regulationmodes for open-loop or closed-loop spray control.Adding an AutoJet Spray Controller can improve the performanceand efficiency of air atomizing nozzles in a variety ofways:• Accurately control liquid, atomizing air and fan pressures forproper drop size, flow rate and spray angle• Increase cycle speed for automatic spray nozzles andcontrol spray timing more precisely• Easily program system setpoint parameters• Use Pulse Width Modulation to improve the efficiency ofelectric spray nozzles• Notify operators or shut down on specified faults• Assist with troubleshooting spray system problems• Integrate spray control withexisting mill control systems66