Cooling/Casting - Spraying Systems Co.

Spangling/Cold Strip MillAir Atomizing NozzlesStandard Air Atomizing NozzlesOur J Series of air atomizing nozzles include:Low-Capacity Series. Our 1/8J and 1/4J models range in capacity from0.13 to 72 gph (0.49 to 280 l/h).Medium-Capacity Series. Our 1/2J models range in capacity from4.1 to 306 gph (15.5 to 1158 l/h).High-Capacity Series. Our 1J models range in capacity from 24 to 1740 gph(91 to 6586 l/h).These models are designed to operate at air pressures ranging from 10 to 60 psi(0.7 to 4.0 bar) and can be specified with pressure or siphon/gravity liquid-fed sprayset-ups. They are available in an array of body styles and with a variety of options.Material choices include nickel-plated brass, 303 stainless steel, 316 stainless steelalong with other machineable materials. All J Series nozzles are available in dripfreeversions.Detailed information on the options and performance of the air atomizing nozzlesmost commonly used in steel mills can be found in our Industrial Spray ProductsCatalog or by contacting your local sales representative.JSingle Air Line• The J basic nozzle assembly features air and liquidinlets in opposite positions with an end plug. 1/8”and 1/4” inlet connections are available.• The 6218-1/4JAU features a single air line used bothfor spray atomization and for operation of the aircylinder. The single air line is regulated at the desired“on/off” cycle time causing simultaneous flow ofatomizing air and liquid. The nozzle operates up to180 cycles per minute and requires a minimum airpressure of 30 psi (2 bar).Standard1/4 JAUH• The 1/4JAU features 1/4” NPT (F) air and liquid inletsand 1/8” NPT (F) control valve air inlets.• The 1/4JAUH is a compact air actuated automaticspray gun. It can be used with any UniJet® spray tipto provide precise automated control of intermittentspraying.68