SHURflo Pumps - Sea

8000 Series Diaphragm PumpBypass Pumps 12 VDCSHURFLO• Self-priming up to 8 feet [2.4m]• Chemical-resistant materials• Internal bypass• Can run dry without damage8000-543-2508000 Series internal bypass pumps are ideal for applicationswhere an automatic demand switch is not desired. Pumps withbypass will continue to run without damage once the bypasspressure is reached. They incorporate a triple chamber designwith Viton ® elastomers to withstand the toughest applications.Perfect for spot sprayers, foam markers and transferapplications where smooth, consistent flow is needed.Order InformationPart #8000-543-2508000-543-2108000-543-2208006-543-250DescriptionStandard Bypass Pump:Viton ® valves, Santoprene ®diaphragm, 45 PSI internal bypassStandard Bypass Pump:Viton ® valves, Santoprene ®diaphragm, 35 PSI internal bypassStandard Bypass Pump:Viton ® valves, Santoprene ®diaphragm, 60 PSI internal bypassBypass Pump with ReversedPumphead:Viton ® valves, Santoprene ®diaphragm, 45 PSI internal bypassMaxGPMMaxPSI1.8 501.3 401.5 601.4 50Port Size3⁄8" NPT-Female3⁄8" NPT-Female3⁄8" NPT-Female3⁄8" NPT-FemaleMaxDraw5.55.57.15.5Model PSI BAR GPM L/min Amps20 1.4 1.30 4.9 4.08000-543-25030 2.1 1.11 4.2 4.740 2.8 0.69 2.6 5.250 4.1 0.18 0.7 5.510 0.7 1.28 4.8 3.88000-543-21020 1.4 1.19 4.5 4.430 2.1 1.07 4.0 5.040 2.8 0.05 0.19 5.510 0.7 1.52 5.7 3.88000-543-22020 1.4 1.45 5.5 4.530 2.1 1.39 5.3 5.260 4.1 1.12 4.2 7.110 0.7 1.40 5.3 3.48006-543-25020 1.4 1.30 4.9 4.040 2.8 0.69 2.6 5.250 4.1 0.18 0.7 5.58000 Series Diaphragm PumpNo Control 12 VDC• Self-priming up to 8 feet [2.4m]• Chemical-resistant materials• 1 ⁄4” adapter for external bypass hook-up• Can run dry without damageDesigned to accommodate applications that have externalpressure valves plumbed into the system.8000-543-290Order InformationPart #Description8000-543-290 Front Adapter Pump:Viton ® valves, Santoprene ®diaphragm, 1 ⁄4" FNPT adaptermounted on switch portsMaxGPMMaxPSIPort Size1.8 100 3⁄8" NPT-FemaleMaxDraw8.8Model PSI BAR GPM L/min Amps20 1.4 1.26 4.7 5.040 2.8 1.14 4.3 6.28000-543-290 60 4.1 1.02 3.9 7.380 5.5 0.93 3.5 8.0100 6.9 0.84 3.2 8.895

2087 Series Diaphragm PumpAutomatic-Demand Pump 12 VDC with Electrical Package• Self-priming up to 12 vertical feet [3.7m]• Chemical-resistant materials• Can run dry without damage• Rocker switch protected from the elements by a clear boot• Built-in on/off switch included• 2 pin connector on power lead2087-593-135(Front and Back Shown)These models include an aesthetically-pleasing moldedassembly, housing a rocker-type manual switch withinternational on/off switch symbols. Wiring is neatly routed intothe molded assembly through form fitted entries and strainrelieved inside the housing.Order InformationPart #DescriptionStandard Demand Pump:2087-593-135 Viton ® valves, Santoprene ® diaphragm,45 PSI demand switch* 1 ⁄2" - 14 National American Straight Pipe ThreadMaxGPMMaxPSI3 50PortSize1⁄2"MSPT*MaleMaxDraw8Model PSI BAR GPM L/min Amps10 0.7 2.80 10.6 5.320 1.4 2.69 10.2 5.52087-593-135 30 2.1 2.36 8.9 6.740 2.8 2.05 7.8 7.750 3.4 1.42 5.4 8.02088 Series Diaphragm PumpAutomatic-Demand Pumps 12 VDC• Self-priming up to 12 feet [3.7m]• Chemical-resistant materials• Can run dry without damage• Automatic demand• Built-in check valve (varies by model) prevents back flow offluid into the solution tank• Continuous duty motor on fin-cooled versionOrder InformationPart #DescriptionStandard Pump:2088-343-135 Viton ® valves, Santoprene ® diaphragm,45 PSI demand switch* 1 ⁄2" - 14 National American Straight Pipe ThreadOrder InformationPart #2088-443-144DescriptionStandard Pump:Santoprene ® valves, Santoprene ®diaphragm, 45 PSI demand switch2088-343-135MaxGPMMaxPSI3 40MaxGPMMaxPSI3.5 45PortSize1⁄2"MSPT*MalePortSize1⁄2"MSPT*MaleMaxDraw7.7MaxDraw9.1SHURflo 2088 Series diaphragm pumps deliver reliableperformance in high flow, moderate pressure applications. Theyare used in a variety of spot spraying, multi-tip spraying andfertilizer drip applications that require flows of up to 3.6 GPM[13.6 l/min]. They are available in a variety of chemical-resistantmaterials.Model PSI BAR GPM L/min Amps10 0.7 2.80 10.6 5.32088-343-13520 1.4 2.69 10.2 5.530 2.1 2.36 8.9 6.740 2.8 2.05 7.8 7.7Model PSI BAR GPM L/min Amps10 0.7 2.83 10.7 5.82088-443-14420 1.4 2.56 9.7 7.030 2.1 2.31 8.7 8.040 2.8 2.02 7.6 9.198

2088 Series Diaphragm PumpsNo Control 12 VDCSHURFLO• Self-priming up to 12 vertical feet [3.7m]• Chemical-resistant materials• Can run dry without damage• Built-in check valve (may vary by models) prevents back flowof fluid through the pumpOrder Information2088-343-500Part #DescriptionMaxGPMFront Adapter Pump with ElectricalPackage: Viton ® valves, Santoprene ®2088-343-170diaphragm, 1 ⁄4" FPT adapter mounted onswitch port, built-in on/off power switch,fuse holder pre-wired w/2-wire moldedconnector, no demand switchFront Adapter Pump: Viton ® valves,2088-343-500 Santoprene ® diaphragm, 1 ⁄4" FPT adaptermounted on switch port, no demand switch* 1 ⁄2" - 14 National American Straight Pipe ThreadMaxPSI3.3 503.3 50PortSize1⁄2"MSPT*Male1⁄2"MSPT*MaleMaxDraw9.110.1SHURflo 2088 Series diaphragm pumps deliver reliableperformance in high flow, moderate pressure applications. Theyare used in a variety of spraying and transferring applicationsthat require flows of up to 3.3 GPM [12.5 l/min]. They areavailable in a variety of chemical-resistant materials. Theycan be mounted in any position and are designed for easymaintenance.Model PSI BAR GPM L/min Amps10 0.7 3.00 11.3 5.02088-343-170 30 2.1 2.38 9.0 7.540 2.8 2.14 8.1 8.350 3.4 1.86 7.0 9.110 0.7 2.79 10.6 5.82088-343-50030 2.1 2.26 8.6 8.340 2.8 1.99 7.5 9.350 3.4 1.69 6.4 10.12088 Series Diaphragm PumpsAutomatic-Demand 115 VAC• Self-priming up to 12 feet [3.7m]• Chemical-resistant materials• Can run dry without damage• Automatic demand• Built-in check valve (may vary by model) prevents back flowof fluid into the solution tank2088-394-144These SHURflo 2088 Series pumps offer the same reliability asthe 12 VDC version except in 115 VAC capacity. They are usedin a variety of spot spraying, mini-bulk transfer and fertilizerapplications that require flows of up to 3.2 GPM [12.1 l/min].They are available in a variety of chemical-resistant materials.Order InformationPart #2088-394-1442088-394-154DescriptionStandard Pump with 6' powercord: Viton ® valves, Santoprene ®diaphragm, 45 PSI demand switchStandard Pump: Viton ® valves,Santoprene ® diaphragm, 45 PSIdemand switch* 1 ⁄2" - 14 National American Straight Pipe ThreadMaxGPMMaxPSI3 403.2 40PortSize1⁄2"MSPT*Male1⁄2"MSPT*MaleMaxDraw0.70.98Model PSI BAR GPM L/min Amps10 0.7 2.40 9.1 .552088-394-14420 1.4 2.20 8.3 .6030 2.1 1.90 7.2 .6540 2.8 1.60 6.0 .7010 0.7 2.71 10.2 .652088-394-15420 1.4 2.41 9.1 .7730 2.1 2.10 8.0 .8940 2.8 1.84 7.0 .9899

166 Series Diaphragm PumpsAir-Driven• 2 chamber dual diaphragm• Positive displacement• On-demand operation• Chemical-resistant polypropylene body• 30 to 60 PSI [2.1-4.1 bar]166-200-36The SHURflo 166 air-operated demand pumps employ adual diaphragm design, with a patented fast action switchingmechanism allowing for consistent flow and pressure. They arebuilt for the toughest pumping applications and are available ina variety of elastomers that allow them to be compatible withmost caustic or acidic fluids. Ideal for chemical transfer, liquidfertilizer injection and agricultural spraying.Order InformationPart # Description Max GPM Max PSI166-200-36 Viton ® valves and diaphragm 0.6 30-60166-200-46 Buna valves and diaphragm 0.6 30-60166-200-56 EPDM valves and diaphragm 0.6 30-60166-200-57 Santoprene ® valves and diaphragm 0.6 30-60Power Twin PumpDemand Pumps 12 VDC• Up to 6.25 GPM [23.7 Li/min]• Thermally-protected motor with heat sink• Self-priming• Quiet, balanced operation• Long-life pressure switch• Intake/Discharge manifold optional4211-035Take all the performance and features of the time-tested 2088series, double it, and the result is the high-flow Power Twin.Delivers an open flow of 6.25 GPM [23.7 l/min] at a mere 8.7amps. At 40 PSI [2.8 bar], it delivers 3.5 GPM [13.2 l/min] anddraws only 17.2 amps. One of the most efficient high-flow selfprimingpumps available today, the Power Twin is excellent fortransferring, light-duty spraying, and use as a 1:1 proportioningpump.Order InformationPart #4111-0354211-035DescriptionViton ® valves, Santoprene ® diaphragm,45 PSI demand switch, manifold with5⁄8" barb portsViton ® valves, Santoprene ® diaphragm,45 PSI demand switchMaxGPMMaxPSIPortSizeMaxDraw6.25 40 1⁄2" MPT 17.26.25 40 1⁄2" MPT 17.2Model PSI BAR GPM L/min Amps0 0 6.25 23.5 8.710 0.7 5.7 21.6 12.24111-03520 1.4 5.0 19.0 14.530 2.1 4.3 16.2 16.140 2.8 3.5 13.2 17.20 0 6.25 23.5 8.710 0.7 5.7 21.6 12.24211-03520 1.4 5.0 19.0 14.530 2.1 4.3 16.2 16.140 2.8 3.5 13.2 17.2100

9300 Series Submersible Pump24 VDCSHURFLO• Fits wells 4 inches [10.2 cm] in diameter and larger• Accepts a variety of jacketed cables from your power source• Runs dry without damage• Corrosion-proof housing with stainless steel fasteners• Long-life, 24 VDC operation• Quick disconnect for easy installation and serviceOrder InformationPart # Description Max GPM Max Draw9325-043-101 EPDM valves, Santoprene ® diaphragm 1.8 4.1The SHURflo 9300 series pump offers a solution to yourremote water needs. It’s rugged, durable and built to last. Thispump delivers a steady 1.0 GPM [3.8 1/min] operating at 100PSI [6.9 bar] maximum at 230 feet [70.1m]. It incorporatesa unique, waterblocked cable connector that is imperviousto water leakage and condensation problems preventingwaterwicking. Great for applications in livestock watering,irrigation, ponds, islands, remote homes and cabins.Model9325-043-101Vertical Lift Solar Array CurrentFeet Meters GPH LPH Watts Amps20 6.1 117 443 58 1.560 18.3 109 413 78 2.1100 30.5 103 390 99 2.6140 42.7 99 375 115 3.1180 54.9 93 352 135 3.6230 70.1 82 310 155 4.13000 Series Flexible Impeller Pumps12 VDC• Self-priming to 7.5 feet [2.3m] vertical• Maximum head of 28 feet [8.5m] (12 PSI [.83 bar])• Liquid temps from 40° F to 185° F [4.4°C to 85°C]• Thermal overload protection• Stainless steel shaft• BUNA-N impeller and lip seal• Built-in reverse switch and 8 foot [2.4m] cable with batteryclipsThe 3000 Series is suitable for a variety of uses from pumpingwater to changing oil in cars, trucks and farm equipment.Pumps incorporate thermal overload protection.Order InformationPart # Max GPM Max PSI Max Draw3000-350 2.5 10 7.4Not intended for use with flammable liquids or in flammableenvironments.Model PSI BAR Dischg. Ft of Head GPM L/min Amps0 0.0 0.0 3.8 14.4 6.53000-350 5 0.3 11.5 3.4 12.9 7.110 0.7 23.0 2.5 9.5 7.4101

SLV Series Diaphragm PumpDemand Pumps• Automatic demand; 25 PSI [1.72 bar] on/40 PSI [2.8 bar]• Self-priming up to 2.5 vertical feet [.76 m]• Long-life pressure switch• Thermally-protected ball bearing motor with splash-proofhousing• Internal fan radiates heat; external heat sink not required• Integral on/off switch optionalSLV10-AA40(Front and Back Shown)The SHURflo SLV is ideal for low volume, intermittent-dutyapplications requiring a compact pump with low powerconsumption. Unique design has no metals in the fluid pathfor maximum chemical resistance. Pump features includeautomatic demand operation and elastomers that handle awide variety of chemicals. Perfect for low volume spraying andtransfer. Cost effective yet with high performance and reliability;the SLV offers tremendous value.Order Information - Automatic Demand Pumps 12 VDCPart #SLV10-AA40SLV10-AA41SLV10-AA48DescriptionViton ® valves, Santoprene ® diaphragm,40 PSI demand switch, Integral on/offswitch includedViton ® valves, Santoprene ® diaphragm,40 PSI demand switchViton ® valves, Santoprene ® diaphragm,40 PSI demand switch, Manual switchand 2 pin connector 12VDCMaxGPMMaxPSIPort SizeMaxDraw1 30 3⁄8" Barb 2.51 30 3⁄8" Barb 2.51 30 3⁄8" Barb 2.5Automatic Demand Pumps 12 VDCModel PSI BAR GPM L/min Amps3 0.2 0.90 3.4 1.8SLV10-AA4010 0.7 0.73 2.8 2.120 1.4 0.62 2.3 2.330 2.1 0.49 1.9 2.53 0.2 0.90 3.4 1.8SLV10-AA4110 0.7 0.73 2.8 2.120 1.4 0.62 2.3 2.330 2.1 0.49 1.9 2.53 0.2 0.90 3.4 1.8SLV10-AA4810 0.7 0.73 2.8 2.120 1.4 0.62 2.3 2.330 2.1 0.49 1.9 2.5Order Information - Automatic Demand Pump 24 VDCPart #SLV10-AB41DescriptionViton ® valves, Santoprene ®diaphragm, 40 PSI demand switchMaxGPMMaxPSIPortSizeMaxDraw1 30 3⁄8" Barb 1.23Automatic Demand Pump 24 VDCModel PSI BAR GPM L/min Amps3 0.2 0.90 3.4 0.89SLV10-AB4110 0.7 0.73 2.8 1.0020 1.4 0.62 2.3 1.1530 2.1 0.49 1.9 1.23Order Information - No Control Transfer Pump 12 VDCPart #SLV10-HA01DescriptionViton® valves, Geolast ® diaphragm,No demand switchMaxGPMMaxPSIPortSizeMaxDraw1 30 3⁄8" Barb 2.5No Control Transfer Pump 12 VDCModel PSI BAR GPM L/min Amps3 0.2 0.90 3.4 1.8SLV10-HA0110 0.7 0.73 2.8 2.120 1.4 0.62 2.3 2.330 2.1 0.49 1.9 2.5102

AccessoriesDrill PumpSHURFLO• Self-priming to 8 feet [2.4m] vertical• Pumps liquids 40° F to 120° F [4.4° C to 48.8° C]• BUNA impeller and seals• 1⁄4” [6.35 mm] shaft fits standard drillsOrder InformationPart # Max GPH Port Size Shaft Size L/hr3010-000 200 3⁄4" (M) GHT 1⁄4" 757Attaches to any standard 1 ⁄4” [6.35 mm] drill motor. Ideal forpumping water from appliances, aquariums, water beds, sinks,toilets or drums. Includes a 1 ⁄4” [6.35 mm] oil probe that easilyallows the transfer of oil from cars, trucks, lawn and gardenequipment. Not intended for use with flammable liquids or inflammable environments.Oil Change System• Complete with necessary tubing and oil storage container• Built-in reversible switch and 8 foot cable with battery clips• Thermal overload protectionMakes a messy job clean and easy. Simply install the oil probein the engine oil dipstick tube, attach the battery clips, and flipthe switch. Oil is safely removed and stored in the easy to carrycontainer. Oil should be heated to 140°F for maximum pumpefficiency.Order InformationModelDescription8050-305-426 Oil Change SystemAccumulator Tank, Heat SinkShurflo Bowl Style StrainersAccumulator TankOrder InformationHeat SinkModelDescriptionAccumulator Tank: 24 oz. total capacity (liquid and air), pre-pressurized to181-101 20 PSI [1.4 bar], (0 to 100 PSI [6.9 bar] range of adjustment), Santoprene ®bladder, mounting bracket. 1 ⁄2" (F) NPT Female ports, NSF approved.34-007 5" [12.7 cm] Heat Sink to assist cooling in Continuous-duty applications34-006 3" [7.6 cm] Heat Sink to assist cooling in Continuous-duty applicationsOrder InformationModelDescription255-223 50 Mesh screen, 1 ⁄2" Barb Inlet x 1 ⁄2 NPSM Female Outlet255-31350 Mesh screen, 1 ⁄2" NPSM Male Inlet x 1 ⁄2 NPSM Female Outlet,EPDM O-ring255-323 50 Mesh screen, 1 ⁄2" Barb Inlet x 1 ⁄2 NPSM Female Outlet, EPDM O-ring255-646 50 Mesh screen, 3 ⁄8" x 3 ⁄8" MNPT Poly/Nylon, Viton ® O-ring255-457 50 Mesh screen, 3 ⁄8" x 3 ⁄8" MNPT Poly/Nylon, Buna O-ring255-568 50 Mesh screen, 3 ⁄8" x 3 ⁄8" MNPT Poly/Nylon, EPDM O-ring255-61350 Mesh screen, 1 ⁄2" NPSM Male Inlet x 1 ⁄2 NPSM Female Outlet,Viton ® O-ring255-623 50 Mesh screen, 1 ⁄2" Barb Inlet x 1 ⁄2 NPSM Female Outlet, Viton ® O-ring255-41350 Mesh screen, 1 ⁄2" NPSM Male Inlet x 1 ⁄2 NPSM Female Outlet,Buna O-ring255-423 50 Mesh screen, 1 ⁄2" Barb Inlet x 1 ⁄2 NPSM Female Outlet, Buna O-ring103

SHURflo FittingsBarb TeePart #Description8-126-00 1⁄2" [12mm] Barb Tee - PolyproBarb Tee X PipePart #Description8-010 3⁄8" [10mm] MNPT-Male x 1 ⁄2" Barb Tee - NylonSwivel Hex Wingnut StraightPart #Description234-2936 1⁄2" [12mm] NPT-Female x 5 ⁄8" [16 mm] Barb - Polypro234-2946 1⁄2" [12mm] NPT-Female x 3 ⁄4" [19 mm] Barb - Polypro234-2916 1⁄2" [12mm] NPT-Female x 1 ⁄2" [12 mm] Barb - Polypro234-2926 1⁄2" [12mm] NPT-Female x 3 ⁄8" [10 mm] Barb - PolyproSwivel Hexnut ElbowPart #Description234-3926 1⁄2" [12mm] NPT-Female x 1 ⁄2" [12 mm] Barb Swivel Hexnut Elbow - Polypro8-035 * 1⁄2" [12mm] NPT-Female x 1 ⁄2" [12 mm] NPT Male Swivel Hexnut Elbow Adaptor - Nylon234-3916 1⁄2" [12mm] NPT-Female x 3 ⁄8" [10 mm] Barb Swivel Hexnut Elbow - Polypro234-3946 1⁄2" [12mm] NPT-Female x 3 ⁄4" [19 mm] Barb Swivel - Polypro234-3936 1⁄2" [12mm] NPT-Female x 5 ⁄8" [16 mm] Barb Swivel - Polypro*Fitting available only in nylon – CHECK COMPATIBILITY.Barbed X Pipe StraightPart #Description8-005-01 3⁄8" [10mm] NPT-Male x 3 ⁄8" [10 mm] Barb - Polypro8-007-01 3⁄8" [10mm] NPT-Male x 1 ⁄2" [12 mm] Barb - Polypro8-021-01 1⁄2" [12mm] NPT-Male x 1 ⁄2" [12 mm] Barb - PolyproBarbed X Pipe ElbowPart #Description8-006-01 3⁄8" [10mm] NPT-Male x 3 ⁄8" [10 mm] Barb8-008-01 3⁄8" [10mm] NPT-Male x 1 ⁄2" [12 mm] BarbAdapters8-145-008-150-01Part #Description8-145-00 3⁄8" [10mm] NPT-Male x 1 ⁄2" [12 mm] NPT-Male - Polypro8-150-01* 1⁄2" [12mm] NPT-Female x 3 ⁄4" [19 mm] GHT (M) - Nylon8-205-00 1⁄2" [12mm] NPT-Female x 1 ⁄2" [12 mm] NPT-Male - Aceryl*Fitting available only in nylon – CHECK COMPATIBILITY.8-205-00104

Mini-Bulk Chemical Transfer SystemSHURFLOSHURflo Mini-Bulk Chemical Transfer Pumps and Systems arepurpose-designed and built for market professionals. Drawingon a long history of pioneering leadership in the design andmanufacture of 12-volt agriculture spray pumps, and inputfrom professionals, SHURflo Mini-Bulk systems include manyinnovations that provide substantial user benefits.The SF-1100-REC system is able to be mounted to any tankwith a 9-inch, threaded opening. This system is particularlyuseful when pumping fluids with suspended particles.Order InformationPart#SF-1100-RECDescriptionChemical Transfer Pump with 12 VDC motor, 20 ft. Cable,alligator clips & inline fuse (Part # SF-1100), inline electronicflow meter (Part # FM-1100i), 1-in. NPT x 12 ft. EPDM dischargehose with ball valve/spout, 3-way valve, tubing and fittings toallow tank recirculationSee mini-bulk pumps (page 106) for performance information.AG Runner The SHURflo AG Runner system is ready to takeanywhere. The AG Runner is portable, flexible andextremely versatile, especially for those that use multiplecontainers. The entire system is mounted in a sturdy, easyto-carry,welded frame.Order InformationPart# Description Flow Meter TypeSF-1100-PTSChemical Transfer Pump with 12 VDCmotor, 20 ft. Cable, alligator clips and Pump-mounted (FM-1100)SF-1100-PTSiinline fuse (Part # SF-1100), electronicflow meter, 1-in. NPT x 12 ft. EPDMdischarge hose with ball valve/spout, and Inline (FM-1100i)SF-1100-PTSi-001-in. NPT x 12 ft. EPDM inlet hose with1-in. elbow/ball valve/fitting assemblywith locking cam armsNo flow meterSee mini-bulk pumps (page 106) for performance information.105

Mini-Bulk PumpsThe stand-alone Mini-Bulk Chemical Transfer System pumpsinclude a 12 VDC motor, 20 ft. cable with alligator clips and aninline fuse. The stand-alone pump does not include any tankcouplings, ball valves or mounting devices.Order InformationPart# Inlet/Outlet Valve MaterialSF-1100 2" MNPT EPDM valvesSF-1105 1" FNPT Viton ® valvesModel PSI BAR GPM L/min Amps0 0.0 10.7 40 9.3SF-1100 and SF-11055 0.3 10.1 38 10.310 0.7 8.7 33 12.315 1.0 7.6 29 13.9• Highly-efficient design delivers increased flow with viscousmicro-encapsulated or suspended chemicals• High flow rate while pumping viscous chemicals, incombination with free-flowing return loop, providessubstantially increased turnover rate on recirculation models• SHURflo proprietary designed co-molded diaphragmmolecularly bonds the pump piston to the diaphragm inthe molding process. The result is an inherently leakproofdiaphragm capable of years of trouble-free service• The highly efficient design utilizes a SHURflo-built 3”diameter permanent magnet motor— more performance andless weight, without more cost• While designed and tested to provide high performanceand years of durability, the SF-1100 and SF-1105 are fieldserviceable with hand tools• Capable of priming up to 12 feetMini-Bulk Flow MetersThe electronic flow meter assemblies (including batteries) areready to mount to the pump or install.• Highly accurate nutating disk design• Large LCD display makes meter reading easy from adistance on pump-mounted systems• Simple calibration steps and control button layout• Long-life lithium batteries• Easy-to-service electronics and batteries• Available in both pump-mounted and hose-end configurationsOrder InformationPart#FM-1100FM-1100iDescriptionPump-mounted meter kit- 1" MNPT inlet & outletInline meter kit -1" FNPT inlet & outlet106

Mini-Bulk Pumps & Flow Meter KitsMotor Assembly Kit(Part# 94-718-00)The 94-718-00 is the motorassembly used in any SF-1100Series Pump.The motor assembly kit includes:• 12 VDC motor with 20 ft. cable,alligator clips & inline fuse• Integrated pump lower housing• Built-in on-off SwitchDiaphragm/Lower Housing/Drive Assembly Kit(Part# 94-719-00)The 94-719-00 is a replacementSantoprene ® diaphragm/lowerhousing/drive assembly ready forinstallation.SHURFLOValve Housing KitsThe replacement valve housingsinclude a complete, fully-assembledvalve housing with o-ring seal readyfor installation. Available with EPDMor Viton ® valves.Pump Housing Kit(Part# 94-721-00)The 94-721-00 is a replacementPolypropylene Upper Housingwhich includes the O-ring Sealand Pump Head Screws.Order InformationManufacturer recommendsreplacing the O-ring Seal wheneverthe pump has been taken apart.Part#Description94-720-00 EPDM valves94-720-05 Viton ® valvesManufacturer recommendsreplacing the O-ring Sealwhenever the pump has beentaken apart.FM-1100 Series Meter Electronics Kit(Part# 94-732-00)FM-1100 Series Meter Housing Seal Cover Kit(Part# 94-733-00)The 94-732-00 Flow MeterElectronics kit includes the frontcover assembly and the electronicdisplay including o-ring and batteries.The electronics kit will fit both thepump-mounted and inline meters.The 94-733-00 Flow MeterHousing Seal Cover kit includesthe seal cover, o-ring andscrews. The flow meter housingseal cover will fit both the pumpmountedand inline meters.FM-1100 Series Meter Nutating Chamber Assembly Kit(Part# 94-734-00)The 94-734-00 is a replacementnutating chamber assembly whichincludes the o-ring seal. The nutatingchamber assembly kit will fit both thepump-mounted and inline meters.FM-1100 Series Meter Housing KitsReplacement meter housingsfor pump-mounted or inline flowmeters.Part#Description94-735-00 Replacement 90º meter housing with O-ring seal94-736-00 Replacement inline meter housing with O-ring seal107

Mini-Bulk Parts & Accessories90° Elbow Fitting Kit(Part# 94-712-00)The 94-712-00 is a replacement 2-in.street elbow. Fitting has 2-in. maleNPT threads on one side and 2-in.female NPT threads on the other.Ball Valve/Spout Kit(Part# 94-716-00)The 94-716-00 is areplacement 1-in. NPT ballvalve with spout.Discharge Hose Kit(Part# 94-717-00)The 94-717-00 is a replacement1-in. NPT x 12 ft. EPDM hose.Alligator Clips/Fuse Kit(Part# 94-723-00)The 94-723-00 is areplacement set of red andblack alligator clips, including afuse holder.Recirculation Lid Kit(Part# 94-724-00)The 94-724-00 is areplacement lid for the Mini-Bulk Chemical Recirculationsystem.Recirculation Cap Kit(Part# 94-725-00)The 94-725-00 is areplacement cap for the Mini-Bulk Chemical Recirculationsystem.Recirculation System Return Hose Kit(Part# 94-737-00)The Recirculation SystemReturn Hose Kit includes thereturn hose and two hoseclamps.Elbow/Valve/Coupling Kit(Part# 94-738-00)The 94-738-00 is areplacement elbow/valve/coupling assembly, whichincludes a 1-in. street elbow,1-in. ball valve and a 1-in.bayonet tank coupling.108