Class 3200 Meter - E-Mon

More documents

Recommendations

Info

CLASS 3200 METER1.0 INTRODUCTIONThe E-Mon D-Mon® Class 3200 meter is a 3-element meter with communications. Thedevice is used to monitor electric power usage of individual loads after the utility meterand store kW and kVAR data for automatic meter reading. Installation must only beperformed by qualified personnel and in accordance with these instructions and allapplicable local and national electrical codes. E-Mon and its representatives assumeno responsibility for damages or injury resulting from the improper installation of thismeter.Verify the input voltage rating and configuration on the unit panel label to ensure that itis suitable for the intended electrical service. Class 3200 meters labeled for 120/208Vservice MUST NOT be installed on service feeds of 277/480 volts or 347/600 and viceversa.Verify that the Class 3200 meter’s current sensors are sized suitably for the load to bemonitored. Compare the color of the arrows on the current sensors to the chart belowto confirm the correct current sensor is being used.Sensor Arrow Color CodeBrownRedYellowBlackBlueWhite/BlackSensor Rating100 A200 A400 A800 A1600 A3200 A62-0390-02 4
CLASS 3200 METERCAUTIONInternal circuit components are extremely sensitive to electrostatic discharge.Prior to handling or touching internal circuitry, discharge any static buildup onyour person. To discharge yourself, touch a grounded metal object such asconduit or an earth-grounded enclosure.WARNINGUse of this instrument, the E-Mon D-Mon Class 3200 meter, in a mannerinconsistent with this manual or not specified by the manufacturer in writing,can cause permanent damage to the unit and/or serious injury to the operator.The protection and safety features provided by this equipment may becomeimpaired or otherwise compromised.NOTE:If any trouble arises during the installation or functional verification operations,do not immediately remove the unit. Before removing the unit, contactE-Mon’s technical support and/or engineering department at (800) 334-3666.E-Mon’ s technical department will assist you in detailed troubleshooting ofthe Class 3200 meter installation and assist you in getting the unit operatingcorrectly.5 62-0390-02
Page 1 and 2: Class 3200 MeterADVANCED KWH/DEMAND
Page 6 and 7: CLASS 3200 METER2.0 INTERNAL ELECTR
Page 8 and 9: CLASS 3200 METER3.0 METER TECHNICAL
Page 10 and 11: CLASS 3200 METER4.0 SAFETY LABEL DE
Page 13 and 14: 6.2 Main Power Board Connections (c
Page 15 and 16: 6.3 Phasing of Line VoltageCLASS 32
Page 17 and 18: 6.4.1 Current Sensor WiringCLASS 32
Page 19 and 20: 6.6.2 Current Sensor DiagnosticsCLA
Page 21 and 22: CLASS 3200 METER6.7 RS-485 Wiring (
Page 23 and 24: CLASS 3200 METER6.8.2 Connecting th
Page 25 and 26: 6.9.1 Modem (RS-232 KEY RM)CLASS 32
Page 27 and 28: 6.10 Modbus RTU WiringCLASS 3200 ME
Page 29 and 30: 6.13 Ethernet CommunicationsEtherne
Page 31 and 32: 7.0 MULTIPLE-LOAD MONITORING(CONTIN
Page 33 and 34: 9.0 LITHIUM BATTERY REPLACEMENT(CON
Page 35 and 36: 10.2 Normal Mode Display ScreensThe
Page 37 and 38: 10.3.1 Date & TimeTo change the dat
Page 39 and 40: 10.3.3 Peak Demand ResetTo reset th
Page 41 and 42: 11.0 HIGH VOLTAGE METERINGkWh Meter
Page 43 and 44: This special high voltage meter ins
Page 45 and 46: ModBus Customer Point Map: CL3200Ad
Page 47 and 48: InstanceID1 1 AnalogInput2 1 Analog
Page 49 and 50: InstanceIDBACnet Object Descriptors
Page 51 and 52: 13.0 LIMITED METER WARRANTYSubject

Class 3200 Meter - E-Mon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?