Ondatherm 900 - roofing - PGA Consultants

Ondatherm 900 - roofing120A - Metal CladdingAccessoriesMatching flashings and support zeds.Fittings and accessories generally221 Accessories Cappings, closure pieces, flashings, trims cills, gutters, fillers, spacers, tapes, sealants, fixings etc, where notspecified, are to be types as recommended by ArcelorMittal - Arval.223 Isolating Tape A type recommended for the purpose by ArcelorMittal - Arval. Apply to those surfaces of supports whichwould otherwise be in contact with cladding or accessories after fixing.310A Purpose madecold formedmetalaccessoriesMaterial:Thickness/gauge:Finish/colour:Galvanized cold rolled steel sheet grade S220 GD.0.75mm minimum.External - Colorissime range.Internal - Interior 912Workmanship as NBS Standard Section Z22.RFix to Ondatherm /Structure with 4.8mm stitcher screws (or rivets) at 900mm nominalcenters or as required by penetration manufacturer.Flashing To Pre-FormedBase Unit BY OTHERSOndatherm 900 Roof PanelMechanical ExtractBY OTHERSPre-Formed Closure PieceBY OTHERSNote: These details are for guidance only.The individual building designer mustsatisfy him/herself of any and all coldbridging issues and adjust the finaldesign layout accordingly.Preformed Base UnitBY OTHERS9 x 3mm ButylRubber SealantRoof Steelwork PurlinMechanical ExtractMODEL VELOCITY r.p.m. VOLUME m3/hHT-30HT-40HT-50HT-60HT-70HT-801.4501.4501.4501.4501.4501.4501.8004.6008.50014.00018.00026.200Flashing To Pre-FormedBase Unit BY OTHERSOndatherm 900 Roof PanelDouble Flashing PieceBY OTHERSPre-Formed ClosurePiece BY OTHERSPreformed Base UnitBY OTHERS9 x 3mm ButylRubber SealantRoof Steelwork PurlinN° H013 - Penetrations (Note: All installations should comply with the recommendations contained in MCRMA Techinical Papers N° 12 & 14; BS3200 and other relevant national standards)