Monsoon Universal Single Installation Guide - Taps4Less.com

GOOD PRACTICEAlways flush system prior to installing a new or serviced pump.Always ensure the pump are primed (filled with water) before starting. DO NOT RUNPUMP DRY.Always ensure the pump has a flooded suction.Always ensure anti-vibration feet are used.Ensure pump is sited in dry ventilated position.Do not allow pump to freeze.Abide by the Water Supply (Water Fittings) Regulations 1999.Always ensure pump isolating valves in the inlet and outlet flexible hoses are in the fullyopen position.Ensure earth continuity between suction and delivery pipes.Always ensure pump wiring conforms with the current national electrical regulations andinstalled by a competent person.Do not install a non-return valve, or devices whichcontain non-return valves, in the suction (inlet) pipeworkto the pump. The pump must be free to vent to thesupply tanks at all times.Disconnect electrical supply before working on pump.Carefully check pump and pipework for leaks before leaving the installation unattended.THE MONSOON GUARANTEECongratulations on purchasing a Stuart Turner pump.We are confident this pump will provide many years of trouble freeservice as all our products are manufactured to the very higheststandard.All Monsoon Pumps are guaranteed to be free from defects inmaterials or workmanship for 3 years from the date of purchase.EXTEND YOUR PUMP GUARANTEERegister your pump details on-line now (within 30 days of dateof purchase) and the standard 3 year guarantee will be extendedFREE of charge for a further two years.www.stuart-turner.co.uk- 22 -