RTXM135-402
RTXM135-402
RTXM135-402
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>RTXM135</strong>-<strong>402</strong>Absolute Maximum RatingsParameter Symbol Unit Min MaxStorage Temperature RangeT so C -40 85Relative Humidity RH % 0 95Power Supply Voltage V cc V -0.5 +4.5Lead Solder Temperature -oC - 260Lead Solder Duration - S - 10Voltage on any input/output pin VI V 0 VccRecommended Operating ConditionsParameter Symbol Unit Min Typ MaxOperating Temperature RangeT opo C -20 - 70Power Supply Voltage V Vcc 3.14 3.3 3.47Operating Data Rate - Mbps - 155.52 -Specifications (Top=-20 o C to 70 oC and VCC=3.13V to 3.47V )ParameterSymbol Unit Min Typ Max NoteElectrical CharacteristicsSupply Current I mAcc- - 250Transmitter Differential Input Voltage V D mV 300 - 1860Common-mode Input Voltage Vcom-VCC V -1.38 - -0.47LVPECL Output Voltage-Low VOL-VCC V -1.810 - -1.620 1LVPECL Output Voltage-High VOH-VCC V -1.025 - -0.880 1Optical transmitter CharacteristicsCenter Wavelength Range λ nmc1261 1310 1360Launch Optical Power P o dBm -15 - -8 2Extinction Ratio EX dB 8.2 - -Spectral Width ∆λ nm - - 7.7Optical Rise Time tR ns - - 2.0 3Optical Fall Time tF ns - - 2.0 3Eye DiagramOptical receiver CharacteristicsITU recommendation G.957 STM-1/OC-3Sensitivity S dBm - - -35 4Overload Input Power P indBm -8 - - 4Signal Detect-Deasserted P dBmD-50.0 - -Signal Detect-Asserted P AdBm - - -36Wuhan Telecommunication Devices Co., Ltd.http://www.wtd.com.cn2
<strong>RTXM135</strong>-<strong>402</strong>Signal Detect-Hysteresis P A -P dBD0.5 - 6Note1: Terminated with 50Ωto V CC -2V.Note2: Minimum output optical level is at end of life.Note3: These are unfiltered 10~90% values.Note4: Sensitivity and overload for 2 23 -1 PRBS and Bit Error Rate better than or equal to 10E-10.Pin DescriptionPin Name Level Description1 Vee Negative power of receiver section, normally grounded2 RD+ LVPECL Data output of receiver section3 RD- LVPECL Reverse data output of receiver section4 SD LVPECLOptical alarm of receiver section,High level when normal, low level when no light5 Vcc Positive power of receiver section, normally +3.3V6 Vcc Positive power of transmitter section, normally +3.3V7 TD- LVPECL Reverse data input of transmitter section8 TD+ LVPECL Data input of transmitter section9 Vee Negative power of transmitter section, normally groundedTypical Application CircuitTop ViewWuhan Telecommunication Devices Co., Ltd.http://www.wtd.com.cn3
<strong>RTXM135</strong>-<strong>402</strong>Package Outline (unit: mm)8 2.5420.3220.4 163.30.49.439 12.725.4Unit: mmArea reservedfor SC plugRegulatory ComplianceFeature Test Method PerformanceElectrostatic Discharge(ESD) to the Electrical PinsElectrostatic Discharge(ESD) ImmunityElectromagneticInterference (EMI)ImmunityEye SafetyMIL-STD-883EMethod 3015.7IEC61000-4-2CISPR22 ITE Class BEN55022 Class BIEC61000-4-3 Class 2EN55024FDA 21 CFR 1040.10and 1040.11ULTUV EN 60825-1Class 1 (>1.5kV) – Human Body ModelClass 2(>4.0kV)Compliant with standardsTypically show no measurable effect from a 3V/m fieldswept from 80 to 1000MHz applied to the transceiverwithout a chassis enclosure.Compliant with Class 1 laser productUL No. E239070Wuhan Telecommunication Devices Co., Ltd.http://www.wtd.com.cn4
<strong>RTXM135</strong>-<strong>402</strong>Ordering InformationPart No.SpecificationPackage Data rate Laser Power Detector Sensitivity Temp Reach InterfaceApplicationcode<strong>RTXM135</strong>-<strong>402</strong> 1×9 thin 155M 1310nm FP -15~-8dBm PIN+TIA < -35dBm -20~70 o C 15kmDuplex SC SDH S-1.1WTD reserves the right to make changes to the product(s) or information contained herein without notice. Noliability is assumed as a result of their use or application. No rights under any patent accompany the sale ofany such product(s) or information.Edition 2009-12-1Published by Wuhan Telecommunication Devices Co.,Ltd.Copyright © WTDAll Rights Reserved.Wuhan Telecommunication Devices Co., Ltd.http://www.wtd.com.cn5
Change language