ML2000 Series - Corbin Russwin

Options and AccessoriesML2000 and ML20900 ECLStrikesANSI Straight Lip (standard)Brass, bronze or stainless steelNon-handed4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8"(29mm) lip to center (standard)Optional lip lengths: 7/8" (22mm), 1"(25mm), , 1-1/8" (29mm), 1-1/4" (32mm),1-3/8" (35mm), 1-1/2" (38mm), 1-3/4"(44mm), 2" (51mm), 2-1/4" (57mm),2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm)ANSI Curved LipBrass, bronze or stainless steelHanded4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4"(32mm) lip to center (standard)Optional lip lengths: 1-1/8" (29mm), 1-3/8"(35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2"(51mm), 2-1/4" (57mm), 2-1/2" (64mm),2-3/4" (70mm), 3" (76mm)ANSI Wrought Strike BoxTo order with lockset, seeQuick Codes, page 70.To order separately, specify120F76.Strike BoxOpen BackSize: 5-1/4" (133mm) x 1/4" (32mm).Note: Only Available with ML2000Part No.236L72DescriptionStraight LipHand Door Thickness Part1-3/4" (44mm) 411L63 016LHR 2" (51mm) 411L63 018340L60Curved Lip for RH/LHR2-1/4" (57mm) 411L63 020Latchbolt x DeadboltLH Shown340L61Curved Lip for LH/RHRRHR1-3/4" (44mm) 411L62 0162" (51mm) 411L62 018236L73Straight Lip2-1/4" (57mm) 411L62 020Open Back StrikeLatchbolt OnlyLH Shown340L62340L63Curved Lip for RH/LHRCurved Lip for LH/RHRTo order with lockset, seeQuick Codes, page 70. To orderseparately, specify Part No. xDoor Thickness x Finish (e.g.,411L62 x 2" x 626).Deadbolt OnlyBlank Filler Plate236L74236L70To order strike with lockset, see How to Order, page 66.To order strike separately, specify Part No. x Lip Length x Finish(e.g., 340L60 x 1-1/2" x 626).Straight LipStraight LipRabbeted Front and StrikeBrass or bronzeFor 1/2" (13mm) rabbetNo optional lip lengthsLatchbolt xDeadboltLatchbolt onlyDeadbolt onlyPart No.318F66318F69318F64318F67318F65318F68To order with lockset, seeQuick Codes, page 70.To order separately,specify Part No. x Finish(e.g., 318F66 x 626).HandRH/LHRLH/RHRRH/LHRLH/RHRRH/LHRLH/RHRRabbeted Front and Strike45300-2/14ML2000.63