ML2000 Series - Corbin Russwin

How To SpecifyML2000ML2000 Series Suggested SpecificationAll locksets shall be ML2000 Series MortiseLocksets as manufactured by CorbinRusswin Architectural Hardware.Locks shall have all functions available inone size case, manufactured from heavygauge steel, minimum thickness 3/32"(2mm). The handing of all locks shall bereversible without the disassembly of thelockcase. Cases are to be closed on allsides to protect internal parts. Locks areto have adjustable, beveled and armoredfronts, standard 2-3/4" (70mm) backset,a full 3/4" (19mm) throw two-piecemechanical anti-friction latchbolt, anda one-piece stainless steel 1" (25mm)throw deadbolt, and shall be availablefor a minimum door thickness of 1-3/8"(35mm). Internal parts shall be heavygaugesteel, zinc dichromate plated forcorrosion resistance.All locksets with latchbolts, regardlessof trim, shall be listed by UnderwritersLaboratories for A label and lesser classdoors, 4' x 10' single or 8' x 10' pair.Locksets to be used on specified exteriordoors or doors subject to specialatmospheric conditions (roofs, pool areas,chemical laboratories, sewage disposalplants, etc.) shall have non-ferrous lockcases and critical internal components.Cylinder options shall include masterring, flexible head, concealed shell,interchangeable core, security, blockoutsand Pyramid types.Lock trim (knob, lever, sectional orescutcheon) shall be throughboltedthrough the lockcase to ensure correctalignment and proper operation.Certification:UBC - 7 - 2(1997) and UL10C - PositivePressureFederal Specification FF-H-106GANSI A156.13 Series 1000, Grade 1ANSI A117.1, Accessibility Code, 1989(formerly Title 19, California State FireMarshal Standard) (lever handle trim).All locks, trim, and cylinders shall be fromone manufacturer.All locksets shall carry a ten-year limitedwarranty.ML2000 SeriesMortise Locks with BHSS and BLSS TrimA. Ligature Resistant, Mortise: ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1 mortise type manufactured toaccepted OMH requirements with ligature-resistant lever and escutcheon trim. Locksets to be manufactured with a corrosionresistant, formed steel case. Levers and escutcheons are manufactured from stainless steel material. Provide optional lead-lining(lock body), Torx ® fasteners, and Antimicrobial coating as specified in Hardware Sets.1. Acceptable Manufacturers:a. Sargent Manufacturing (SA) - 8200 BHW Seriesb. Corbin Russwin (RU) – ML2000 BHSS Seriesc. Accurate Lock (AC) – CP Crescent Pull Series (with Teflon pad)B. Ligature Resistant, Mortise: ANSI/BHMA A156.13, Series 1000, Operational and Security Grade 1 mortise type manufacturedto [accepted] [Use with caution] OMH requirements with ligature-resistant lever and rose trim. Locksets to be manufactured with acorrosion resistant, formed steel case. Levers and roses are manufactured from stainless steel material. Provide optional lead-lining(lock body), Torx ® fasteners, and Antimicrobial coating as specified in Hardware Sets.1. Acceptable Manufacturers:a. Sargent Manufacturing (SA) - 8200 BHL Seriesb. Corbin Russwin (RU) – ML2000 BLSS Seriesc. Best Lock (BE) – SPSL Seriesd. Town Steel (TS) – MRX-L SeriesML2000.7245300-2/14