ML2000 Series - Corbin Russwin

Reversing HandingML2000Instructions for reversing the hand of the ML2000.Mortise Lock Handing InstructionsStep 1) Move the Red locking screw toside of lock-body being locked (Fig. 1)Catch PlateStep 2) Push in latch then depress catchplate with screw driver (Fig. 1)Step 3) Pull latch out of lock-bodyand turn latch over (Fig. 2)RED Locking ScrewFigure 1Figure 2MAKE SURE CATCH PLATE ISEVEN W/ TOP SURFACEStep 4) Push in latch while holdingscrew driver behind latch tail (Fig. 3)Note: Push in latch until catch plate isno longer depressed (Fig. 4)Step 5) Rotate lock front to matchbevel of door as shown (Fig. 5)GOODFigure 4BADFigure 5Figure 3WARNING:LOCK-IN CANOCCUR IF LATCHIS NOT PROPERLYINSTALLED45300-2/14ML2000.75