QuickAddress Pro API - QAS.com

If you have configured Pro to return DataPlus information, two tabs marked‘Address’ and ‘DataPlus’ appear below the address. Click on the ‘DataPlus’ tabto see information pertaining to the returned address, and click on the‘Address’ tab to see the address itself.Setting Pro OptionsThere are a number of options that you can specify on the Pro user interface.As well as choosing whether to view or hide the menu bar, toolbar, partialaddress bar and informational prompts, you can:• choose a search method;• change the searching options;• specify the country database you want to search with (if you have morethan one database installed);• select the address layout that you want to work with;It is possible to control the options that a user can change with the functionalityflags used in the call to QAProWV_UIStartup (see page 169), and also in theUser Interface Options on the Configuration Editor (see page 197). Therefore,you might not be able to change some of these options from the Pro UserInterface.Selecting a Search MethodThere are two search methods in Pro: Single Line and Typedown. If both areenabled, you can easily switch between them as necessary.To select Single Line searching:Either select “Single Line” from the Search menu, press Ctrl+S orclick the Single Line search button.Single Line search buttonThis calls the function QAProWV_UISetFlags (see page 167) with theqaattribs_SINGLELINESEARCH flag.To select Typedown searching:Either select “Typedown” from the Search menu, press Ctrl+T or clickthe Typedown search button.QuickAddress Pro API Pro User Interface • 41